The product is rich in nano-materials, allowing the coating to penetrate into the interior of the wood, thereby improving the natural properties of teak waterproofing, toughness and so on. In addition, it absorbs UV light to make the coating more durable, but does not affect the appearance of the wood. At present, quick-drying coating is the only way to prevent wood aging. It can evaporate water vapor from teak to prevent teak from peeling off, peeling and cracking. Therefore, it is superior to ordinary teak in water absorption, mildew and microbial attack. oil. The new product has achieved zero VOC emissions and meets environmental requirements.
A director of Nanovations said that we are working on cutting-edge coating technology to produce more efficient and environmentally friendly marine products. The current product can block, absorb ultraviolet light, and is durable, simple, non-toxic and low in cost.
As an important form of Centrifugal Pump, double suction pump is widely used in engineering because of its high lift and large flow. The impeller of this pump type is actually a combination of two back-to-back impellers, and the water flow from the impellers merges into a volute. The double-suction pump has the following characteristics: it is equivalent to two single-suction impellers of the same diameter working at the same time, and the flow rate can be doubled under the same outer diameter of the impeller; the pump casing is horizontally opened, which is convenient for inspection and maintenance. The inlet and outlet of the suction pump are in the same direction and perpendicular to the pump shaft, which is conducive to the arrangement and installation of the pump and the inlet and outlet pipes; the impeller structure of the double suction pump is symmetrical, there is no axial force, and the operation is relatively stable.
Double Suction Pump,Double Suction Centrifugal Pump,Double Suction Water Pump,Carbamide Pump
Jiangsu Qiantu Trading Co., Ltd. , https://www.qtprimingpump.com