3d printing filament production line
We offer top qualify, competitive pricing and fast shipping policy. ABS PLA Plastic rod filament extrusion line
ABSÂ printing WIRE EXRUDER FOR 3D PRINTER , ABS FILAMENT EXTRUSION , ABS ROD PRODUCTION LINE
All the raw materials are imported from Korea and Europe. And throught strict quality control while production, all 3D printer filament can keep a good fluency under a large temperature range. It will help to avoid the head clogging problem while environmental temperature changes.
The current products we manufacture include ABS(acrylonitrile butadiene styrene), PLA (polylactic acid), HIPS (high impact polystyrene) and PVA (polyvinyl alcohol plastic).  We are continuously researching and developing new materials for 3d printing.
We welcome distributors and wholesalers worldwide. We understand that distributors and wholesalers may have different needs in logo, packing and delivery. We are experienced  of expertise in customizing  products to meet every individual needs.
ABS is commonly used in 3D printing, has the following characteristics:
(1) high strength, good toughness;
(2) density is small, when printing larger volume model lighter, save money;
(3) cost-effective, can be processed in wide range temperature;
(4) softer than PLA;
(5) diameter of 3.0/1.75mm, tolerance ± 0.02mm;
(6) 1 kg /plastic spool packaging, can be automatic feed;
(7) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc...
ABSÂ Filament Specification:
| NO. | Item | Unit | ABS |
| 1 | Melt flow index | g /10 min | 1.43 |
| 2 | Print temp. | ºC | 230-250 |
| 3 | Density | kg/m3 | 1.00-1.05 |
| 4 | Flexural strength | Mpa | 50 |
| 5 | Flexural modulus | Mpa | 1955 |
| 6 | Elongation at break | % | 20 |
| 7 | Tensile yield | Mpa | 40 |
| 8 | Impact strength | kJ/m2 | 25 |
| 9 | Diameter | mm | 3.00mm(2.88-3.05) |
| 1.75mm(1.65-1.78mm) |
Â
3d printing filament production line
We offer top qualify, competitive pricing and fast shipping policy. ABS PLA Plastic rod filament extrusion line
ABSÂ printing WIRE EXRUDER FOR 3D PRINTER , ABS FILAMENT EXTRUSION , ABS ROD PRODUCTION LINE
All the raw materials are imported from Korea and Europe. And throught strict quality control while production, all 3D printer filament can keep a good fluency under a large temperature range. It will help to avoid the head clogging problem while environmental temperature changes.
The current products we manufacture include ABS(acrylonitrile butadiene styrene), PLA (polylactic acid), HIPS (high impact polystyrene) and PVA (polyvinyl alcohol plastic).  We are continuously researching and developing new materials for 3d printing.
We welcome distributors and wholesalers worldwide. We understand that distributors and wholesalers may have different needs in logo, packing and delivery. We are experienced  of expertise in customizing  products to meet every individual needs.
ABS is commonly used in 3D printing, has the following characteristics:
(1) high strength, good toughness;
(2) density is small, when printing larger volume model lighter, save money;
(3) cost-effective, can be processed in wide range temperature;
(4) softer than PLA;
(5) diameter of 3.0/1.75mm, tolerance ± 0.02mm;
(6) 1 kg /plastic spool packaging, can be automatic feed;
(7) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc...
ABSÂ Filament Specification:
| NO. | Item | Unit | ABS |
| 1 | Melt flow index | g /10 min | 1.43 |
| 2 | Print temp. | ºC | 230-250 |
| 3 | Density | kg/m3 | 1.00-1.05 |
| 4 | Flexural strength | Mpa | 50 |
| 5 | Flexural modulus | Mpa | 1955 |
| 6 | Elongation at break | % | 20 |
| 7 | Tensile yield | Mpa | 40 |
| 8 | Impact strength | kJ/m2 | 25 |
| 9 | Diameter | mm | 3.00mm(2.88-3.05) |
| 1.75mm(1.65-1.78mm) |
Â
Dot peen marking works by electromechanically striking a carbide or diamond stylus assembly against the surface of a part to be marked.For example,Dog Tag Engraver.The result is a succession of dots to create digits, text, logos, and 2D data matrix codes. Each such dot is the result of a pulsed current that runs through a solenoid, punches a magnet toward the surface, and subsequently returns the stylus to its starting position, awaiting the next pulse. Because each pulse occurs in only a fraction of a second, an entire 2D data matrix code, for example, can be completed in seconds (depending on the size).
Notable Characteristics:
Cost effective
Requires no consumables
High speed accuracy
Will mark any material (including hardened steel)
Compressed air is not required.
Dot Peen Marking Machine,Pnematic Dot Peen Marking Machine,Pneumatic Marking Machine,Dot Markers,Dot Peen Marker,Dog Tag Engraver
Wuhan HAE Technology Co., Ltd. , https://www.chinahae.com