For an ordinary vehicle, the emergency lane is not unusable, but it is provided for vehicles that have urgent needs, including special vehicles such as police cars, fire engines, ambulances, and engineering rescue vehicles, when they perform emergency tasks. Drive in the lane, other vehicles are prohibited from stopping or driving on the emergency lane in non-emergency situations.
So, under what circumstances can we use emergency lanes?
As to which of these are considered to be an emergency situation, the traffic police uncle gave such an interpretation: accidents such as tire blowout, failure of the vehicle's brakes or out-of-control, accidental traffic accident or fire, explosion, etc. Parking, in addition to other conditions is not allowed to park on the highway emergency lane.
Those who are considered urgent by some drivers, for example: “temporarily resting in the emergency laneâ€, “changing the driverâ€, “setting up a map for navigationâ€, “callingâ€, “changing diapers for children†or even “convenient†It is not an emergency, and it is illegal to temporarily park in the emergency lane.
So, what precautions should be taken when parking in the emergency lane?
If an emergency situation requires temporary parking on a high-speed emergency lane, make sure that the vehicle must be parked in the white line of the emergency lane, and that it is best if the vehicle is as close as possible to the high-speed guardrail and away from the carriageway. At the same time, turn on the double flashing lights to indicate an emergency and place a warning triangle 150 meters behind the vehicle. The visibility is low or the distance to place the warning triangle must be properly raised to more than 200 meters at night. After stopping, passengers in the car are prohibited from staying in the car. They should get off the car and move to a safe area outside the guardrail. In addition, it should be noted that when the emergency lane is selected to stop, it should be avoided as much as possible in turning the road section.
Xiao Bian once again urges everyone: Civilization, correct use of emergency lanes, everyone is responsible!
Hydraulic Decoiler
The uncoiler is a special equipment for metal plate leveling. It is used for leveling steel plates and uneven plates. It can be used to form unwinding, leveling, shearing production lines and other plate product production lines according to relevant configurations.
The uncoiler is one of the most important equipments in the welded pipe production line. Its function is to support the steel coil by tightening the inner hole of the steel coil; the other is to send the steel belt head by the rotation of the straight machine. Into the leveler.
The uncoiler spindle has two functions, one is to drive the coil to rotate; the other is the tension support of the coil. The realization of the tension is usually accomplished by pushing the inclined block with the cylinder or cylinder mounted with the spindle. The small unit uses more cylinders and the large unit uses more cylinders. The realization of rotation is usually achieved by the motor rotating the spindle through the reducer. of.
|
suitable material |
Colored Steel plate, galvanized board |
|
Width of the plate |
≤1000-1250mm |
|
Size |
3600*1700*2100mm |
|
Power
|
5.5+4kw |
|
Bearing
|
5-10T |
|
Inner diameter
|
500-508mm
|
|
speed
|
10~15m/min |
|
Weight
|
About3.6T |
|
Voltage
|
380V 50Hz |
Hydraulic Decoiler And Curving Machine
Hydraulic Decoiler,Hydraulic Decoiler Machine,Automatic Hydraulic Decoiler,Steel Decoiling Hydraulic Decoiler
Cangzhou Feiyang Machiney Manufacturing Co., Ltd. , https://www.coldformingmachines.com