Anhui swiping wings can choose to use it in the open

With regard to the use environment of the Hefei wing gate, customers have asked if we can install the wing gate in the open air. In fact, the wing gate is generally not suitable for outdoor use. Because the wing gate is basically not waterproof, this can also be seen from the structure. However, our company does install pure wing-opening gates for customers. However, they are used on a temporary basis or the shelter is not allowed on site. However, before installation, we will inform customers that the use of wings in open air will have a high failure rate.

Faults generally have the following types:

1. Hefei swiping wing gate infrared radiation device will be damaged or malfunction. Because of the harsh environment in the open air, coupled with dew in the gates after rain and snow, the probes on the radios will make small drops of water, causing detection failures, and causing the wing gates to continue to alarm;

2. Wing gate control board or small components can cause damage. After the water splashes in the chassis, after high temperature transpiration, water droplets will adhere to the control board or components. After a certain period of time, the control board or components will cause short circuit or premature aging.

Therefore, it is strongly recommended that every effort be made to build a canopy for customers. Otherwise, customer satisfaction with the product is a problem in the long term.

The swing gate can be completely used in the open air. However, this also has to be chosen. The highest type of anti-rain for the swing gate is IP65, and there is no problem with heavy rain. However, it must be stated at the time of purchase that it is not possible to build a canopy, which can be used outdoors. Pay attention to the parameters provided by the supplier, especially the parameters of the protection against rain and temperature and humidity.

Anhui Linbo Intelligent Technology Engineering Co., Ltd. provides you with excellent Hefei swiping wing gates. Anhui swiping wing gate swing gates three roller gates fast channel gates. If you need to purchase please login or call the hotline to order. We are looking forward to your arrival.

Machining Copper

Copper conductive rate is very good,machining copper(including Machining Brass,machining bronze) is the use of CNC machining out, including turning, drilling, cutting, and screw teeth, etc.. Machining copper commonly used materials: copper, brass, bronze, beryllium copper. the surface treatment is generally silver plating, gold, some laser LOGO, we have a special inspection department to carry out inspection, and ensure that each size to meet the requirements of the drawings, including machining copper applied in various industries: household appliances, conductive slip ring, communications, medical equipment, industrial automation equipment.

Machining Copper,Machining Beryllium Copper,Micro Machining Copper,Electrical Discharge Machining Copper,Copper Machining

Hong Kong RYH CO., LTD , https://www.cncmachiningpart.com