1. Conveying preforms automatically with conveyor.Â
2. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.Â
3. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.Â
4. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.Â
5. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.Â
6. Strong clamping force with high pressure and double crank links to lock the mold.Â
7. Two ways of operating: Automatic and manual.Â
8. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.Â
9. Contamination is avoided for the bottle body.Â
10. Low rejection rate: Less than 0.2 percent.
Â
Maximum Volume: 5 litter
Material: HDPE, PP, PVC, PETG etc.
View Stripe matchable
Easy operation
Automatically
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000; It can produce from 0.2-5L plastic hollow bottle products.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: less than 0.2 percent.
| el | JMX-50 | JMX-60 | JMX-60D | JMX-70D | JMX-80 |
| max.product volume(l) | 2.5 | 6 | 2 | 6 | 25 |
| dry cyle(pc/h) | 1500 | 1200 | 700*2 | 600*2 | 600 |
| screw diameter(mm) | 50 | 60 | 60 | 70 | 80 |
| screw l/d ratio(l/d) | 24-30 | 24-30 | 24-30 | 24-30 | 25-30 |
| screw drive power(kw) | 11-15 | 15-18.5 | 15-18.5 | 18.5-30 | 37-45 |
| screw heating capacity(kw) | 7.8-8.5 | 10.8-12 | 10.8-12 | 12-14.5 | 16-20 |
| output of hdpe(kg/h) | 30-35 | 60-68 | 60-80 | 70-85 | 120-140 |
| clamping force(kn) | 35 | 68 | 35 | 68 | 200 |
| platen distance(mm) | 138-368 | 178-538 | 138-368 | 178-538 | 400-900 |
| capacity(l) | Â | Â | Â | Â | 4.8 |
| max.die diameter(mm) | 90 | 150 | 90 | 150 | 300 |
| central distance of bi-die(mm) | 110-130 | 130-200 | 130-150` | 150-200 | Â |
| max.die diameter(bi-die)(mm) | 55 | 100 | 80 | 100 | Â |
| central distance of three-die(mm) | 80-110 | 100-120 | 80-110 | 110-140 | Â |
| max.die diameter(three-die)(mm) | 40 | 60 | 40 | 70 | Â |
| central distance of four-die(mm) | 60-85 | 60-85 | 60-85 | 70-100 | Â |
| max.die diameter(four-die)(mm) | 25 | 30 | 23 | 45 | Â |
| die heat capacity(kw) | Â | Â | Â | Â | 16 |
| the average consumption(kw/h) | 12.5 | 16.5 | 16.5 | 18.5 | 32 |
| blowing pressure(mpa) | 0.6 | 0.6 | 0.6 | 0.6 | 0.8 |
| air volume(m/min) | 0.4 | 0.5 | 0.4 | 0.4 | 0.8 |
| cooling water pressure(mpa) | 0.2-0.3 | 0.2-0.3 | 0.3 | 0.3 | 0.3 |
| water consumption(l/min) | 30 | 50 | 60 | 70 | 80 |
| oil pump drive power(kw) | 5.5 | 5.5 | 5.5 | 5.5-7.5 | 22 |
| size of machine(l*w*h/min) | 2.8*1.8*2.3 | 3.0*1.9*2.5 | 3.0*2.15*2.6 | 3.5*2.1*2.6 | 4.3*2.2*3.6 |
| weight of machine(ton) | 3.0 | 4.5 | 6.5 | 7.8 | 12.5 |
1.How to tell us your enquiry?
:You can contact us by email, phone call, fax, Instant Messenger (Trademanager, WhatsApp, Skype) and let us know your requirement.
2.Are you manufacturer or trading company ?
We are industrial manufacturer, which locates in Zhangjiagang city over 18years .
3.Where is your factory?
Our Factory is located in Zhangjiagang City, it is very near to Shanghai and Wuxi (airplame and train both available). If you arrive at Shanghai or Wuxi, we can pick you up to visit our factory.
4. Do you have any technical supports with your Beverage Filling Machines?
Yes, We have a professional team of engineers who owned many installation, debug and training experiences abroad, are available to service machinery overseas.
We Warmly Welcome Customers All Over The World To Our Company.If You Have Interests In Our Products. Please Contact Us If You Have Any Problems.
A heavy duty lathe can rotate a workpiece along its axis to perform operations such as grinding, cutting, and drilling like normal CNC lathes. But conventional CNC lathes are for ordinary purposes only, and heavy-duty lathes are designed with special turning spindles different from other machine tools.
In the center of the turning machines, there will be heavy loading saddles for the heavy machining driven by spindles. That center place is the center of gravity of the workpiece, so the turning spindle at the left side shall work with the tailstocks. Operators need to take care of not only the center of gravity but also the center part of the saddle units.
A heavy duty CNC Lathe isn't a stand-alone machine. Heavy-duty CNC lathes are a unique sort of CNC lathe. If you wish to get a very high superior lathe that will not need upgrading in the future, the heavy-duty lathe is surely a sound investment.
Heavy-duty turning lathes are machines made of high-quality materials compared to conventional machine tools and incorporate the most advanced technology. Various designs of heavy-duty CNC lathes involve their center height, bed width, maximum swing, spindle type, travel time, etc.
Heavy-duty CNC lathes are highly efficient machine tools, especially suitable for mass production due to their turning advantages inside the machines. Heavy-duty CNC lathes are ideal machines for metal processing and metal spinning applications in the workshop, as well as metal production work in repair shops, power plants, steel rolling mills, ship buildings, paper mills, and even textiles, oil, and mining industries.
Heavy Duty Lathe Machine,Metal Lathe For Sale,Manual Lathe,Large Lathe,horizontal lathe
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hosdunmachinetools.com