Boiled Sunflower Seeds Belt Dryer / Conveyor Dryer

DW series Belt Dryer is one of the main products of our company. After several times upgrade and update, it is developed to advanced level in China and foreign countries.
Its fundamental is this: Materials that to be dried are distributed on the conveyer belt by charging device (Such as Star-shape material distributor, swinging belt, grinder or granulator). Conveyer belt will go through the channel that consists of one or several heating units. Each heating unit is equipped with air heating system and circulation system. And each channel has one or several dehumidifying system. When the conveyer belt goes through it, hot air will pass though the material that on the belt from up to down or from down to up so that the material can be dried uniformly. Heating source can be steam, heat transfer oil, flue-gas or electricity. Fan is used for heat convection and transferring heat to material and fresh air is supplied and damp air is exhausted. In the drying time cabinet, proper relative temperature and humidity can be kept. Its maximum characteristic is most hot air will circulate in the cabinet, so the heat transferring and mass transferring are strengthened and energy is saved.
  Belt dryer is a common continuous-working drying equipment. It can be widely used in chemical, pharmaceutical, foodstuff, building materials, and electron industries. It is specially suitable for drying the flaking shape, strip shape, and granule materials with good ventilating. To filter cake and cream materials, they can be shaped by granulator or extruder, and then be dried by belt dryer.

3. Parameters of Boiled sunflower seeds material Initial moisture: 52%
Final moisture: 3%
Capacity: Special design according to client's requirements

4. Parameters of heating source Inlet air temperature: 115~155ºC(Design as 110ºC)
Outlet air temperature: 55~70ºC(Design as 50ºC)



Following pictures will show you the belt dryer working in Zhejiang Dahaoda Food Co.,Ltd




  DW series Belt Dryer is one of the main products of our company. After several times upgrade and update, it is developed to advanced level in China and foreign countries.
Its fundamental is this: Materials that to be dried are distributed on the conveyer belt by charging device (Such as Star-shape material distributor, swinging belt, grinder or granulator). Conveyer belt will go through the channel that consists of one or several heating units. Each heating unit is equipped with air heating system and circulation system. And each channel has one or several dehumidifying system. When the conveyer belt goes through it, hot air will pass though the material that on the belt from up to down or from down to up so that the material can be dried uniformly. Heating source can be steam, heat transfer oil, flue-gas or electricity. Fan is used for heat convection and transferring heat to material and fresh air is supplied and damp air is exhausted. In the drying time cabinet, proper relative temperature and humidity can be kept. Its maximum characteristic is most hot air will circulate in the cabinet, so the heat transferring and mass transferring are strengthened and energy is saved.
  Belt dryer is a common continuous-working drying equipment. It can be widely used in chemical, pharmaceutical, foodstuff, building materials, and electron industries. It is specially suitable for drying the flaking shape, strip shape, and granule materials with good ventilating. To filter cake and cream materials, they can be shaped by granulator or extruder, and then be dried by belt dryer.

3. Parameters of Boiled sunflower seeds material Initial moisture: 52%
Final moisture: 3%
Capacity: Special design according to client's requirements

4. Parameters of heating source Inlet air temperature: 115~155ºC(Design as 110ºC)
Outlet air temperature: 55~70ºC(Design as 50ºC)



Following pictures will show you the belt dryer working in Zhejiang Dahaoda Food Co.,Ltd




 

PVC Calcium-zinc Compound Stabilizer

Calcium and zinc stabilizer is synthesized by special composite technology with calcium salt, zinc salt, lubricant and antioxidant as main components. It can not only replace lead cadmium salts and organotin and other toxic stabilizers, but also has good thermal stability, photostability, transparency and coloring power. Practice has proved that in Pvc Resin products, the processing performance is good, the thermal stability is equivalent to Lead Salt Stabilizer, is a good non-toxic stabilizer.

PVC Calcium-zinc Compound Stabilizer,White PVC Calcium-zinc Compound Stabilizer,Powder PVC Calcium-zinc Compound Stabilizer,White Powder PVC Calcium-zinc Compound Stabilizer

Hengshui Yimei New Material Technology Co.,Ltd , https://www.yimeipewax.com