Model NO.: GSZG
Type: Double Cone Rotating
Structure: Rotary Type Drier
Operation Pressure: Vacuum Dryer
Appearance of Dried Sample: Pastes
Type of Flow: Contra-Flow
Function: Mixing and Drying
Trademark: ChangAo
Transport Package: Wrapping Film and Wooden Case
Specification: 1800*720*1500-4350*2450*4950mm
Origin: Changzhou, China
HS Code: 8419399090
Advantages:- Flat roof structure for support.
- The concentricity of shafts at both ends controlled in 15μm.
- Patent no. of the sealing way of internal vacuum pipe: 200720001166.0.
- The mounting bases of the motor and the speed reducer equipped with an adjustable structure.
Notes:
- Different types of butterfly valve, such as rigidity seal and non-wear butterfly valve.
Application:
This drier is suitable for the granular & powder to be vacuum dried & mixed in pharmaceutical, foodstuff, chemical & other industrial lines. Especially suitable for the following requirements of the material:
1. The material unable to accept the high temperature.
2. The material is easily oxidized & dangerous.
3. The material needs to recycle the solvents and toxic gases.
4. The material requires a very low residual volatile matter content.
5. The material requires fully & uniformly mixing.
Technical Data:
| Name | Unit | Model | |||||||||
| Model | GSZG-Â 100 | GSZG- 200 | GSZG- 300 | GSZG- 500 | GSZG- 800 | GSZG- 1000 | GSZG- 2000 | GSZG- 3000 | GSZG- 4000 | GSZG- 5000 | |
| Total Volume | L | 100 | 200 | 300 | 500 | 800 | 1000 | 2000 | 3000 | 4000 | 5000 |
| Working Volume | L | 50 | 100 | 150 | 250 | 400 | 500 | 1000 | 1500 | 2000 | 2500 |
| Heating Area | M2 | 1.16 | 1.5 | 2 | 2.63 | 3.5 | 4.61 | 7.5 | 10.2 | 12.1 | 14.1 |
| Rotating Speed | Rpm | 6 | 5 | 4 | 4 | 4 | |||||
| Power | KW | 1.5 | 2.2 | 2.2 | 3 | 4 | 4/5.5 | 5.5 | 7.5 | 11 | 15 |
| Overall Size | Mm | 1800×720×1500 | 2000×800×1900 | 2200×900×2100 | 2500×1000×2400 | 2700×1200×3200 | 2800×1300×3200 | 3200×1800×3500 | 3800×2000×3600 | 4200×2200×4000 | 4350×2450×4950 |
| Weight | Kg | 825 | 1050 | 1350 | 1650 | 1800 | 2070 | 3000 | 4500 | 5350 | 6000 |
| Design Pressure inside the Cylinder | Mpa | -0.09~0.096 | |||||||||
| Design pressure of Jacket | Mpa | 0.3 | |||||||||
| The adjustable speed motor is optional according to buyer's requirement. Its speed is 0-6 rpm.                                                                   The maximal volume of cylinder can be designed to 10000L. | |||||||||||
Company Profile:
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. Aokai is located in Benniu Town Xinbei District of Changzhou City, close to Beijing-Shanghai Railway, Shanghai-Nanjing Expressway and Changzhou Airport.
The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.
The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.
For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.
With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.
Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.
Q&A:
1. Q: Please describe your warranty period.
   A: 15 months after the equipment is arrived at the destination port or 12 months after  the installation and commissioning of the equipment, whichever comes first.
2. Q: Do you provide on-site installation and commissioning?
  A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.
3. Q: How about the cost of on-site installation and commissioning guidance?
   A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.
4. Q: Are you a factory or a trading company?
   A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.Â
Â
The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.
The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.
For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.
With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.
Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.
Q&A:
1. Q: Please describe your warranty period.
   A: 15 months after the equipment is arrived at the destination port or 12 months after  the installation and commissioning of the equipment, whichever comes first.
2. Q: Do you provide on-site installation and commissioning?
  A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.
3. Q: How about the cost of on-site installation and commissioning guidance?
   A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.
4. Q: Are you a factory or a trading company?
   A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.Â
Â
FOR SALE IS A BRAND NEW AFI HEAVY DUTY MARINE Windshield Wiper Motor.THE MODEL IS MRV 2-SPEED.THE SHAFT IS 2.5 INCHES LONG AND IS RIGHT ANGLE.THE SPLINE IS 1/2".YOU WILL RECEIVE THE BRAND NEW Wiper Motor AS SHOWN. IF YOU HAVE ANY QUESTIONS, PLEASE FEEL FREE TO CALL ME 1-614-580-0951. You will not be disappointed. My feedback speaks for itself. If you have any questions please email me and check out the other items I have for sale. If you have problems with your order, PLEASE CONTACT ME BEFORE LEAVING FEEDBACK. THANK YOU!
ATTENTION! – ATTENTION! – NOTICE! – NOTICE!
BEFORE LEAVING FEEDBACK PLEASE CONTACT ME. I WANT TO MAKE YOU HAPPY AND FIX THE ISSUE. IF YOU BOUGHT THE WRONG THING, IT IS BROKEN, IF SHIPPING TOOK TOO LONG OR EVEN IF YOU`RE HAVING A BAD DAY. I WANT TO HELP! I WANT TO KEEP MY FEEDBACK CLEAN.
Aluminum Alloy Wiper Motor,Marine Wiper Motor,Universal Wiper Motor,Rear Wiper Motor
COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , https://www.capwiper.com