It is generally known that a dump truck is a particularly large-scale vehicle that is particularly easy to operate. Its main workman is required to cooperate with an excavator to perform large-scale engineering operations. Although the dump truck looks simple to operate, there are still many people in the dump truck. The lack of attention to detail has caused some operational problems, resulting in the vehicle not working properly. In order to enable everyone to drive the dump truck safely and correctly, the following five points need attention:
The first point, we all know dump trucks are generally used diesel engine engine operation, etc. After the diesel tank is full, first run the engine for a while, wait until the water temperature reaches 45 degrees before driving.
The second point: Before the dump truck is to be driven, we must first observe whether the operation of the dump truck has been disconnected. After confirming that the road conditions are normal, the lights will be started. Then hang the low gear. Finally, after looking through the reversing mirror to see the surroundings and the rear of the car without any conditions, we can safely hang the second or third gear according to our own situation.
The third point: During the entire journey of the dump truck, we must choose the right gear according to the road conditions and the weight of the goods in the car, and we must choose the right gear, not too fast, not slow, and based on the stability. To avoid the mechanical damage caused by the load rotation of the engine when the vehicle speed is not uniform.
The fourth point: Everyone knows that the dump truck must be based on the amount of load carried by the dump truck itself when loading cargo. It must not be too heavy or too light, so as to avoid causing the steel plate or axle in the machinery to go under bad conditions. Damaged
The fifth point: During our unloading of dump trucks, the on-site staff must always pay attention to the correct direction of the container and avoid deviation from the skewed box. When the direction is deviated, the container should be immediately dropped.
The above is about five important operation methods of the dump truck in the operation process. We hope that the owners can understand the rules of use of the dump truck. It is recommended that everyone should go to the relevant driving organization to practice the hand before driving the dump truck to ensure that the future work Smooth progress.
This product is adopt chip-mounted cement silo is specially designed and developed for the difficulty of packing and the high transportation cost. The top of the warehouse is equipped with a pressure relief valve to balance the pressure inside the chamber. Prevent explosions. Each cement silo is provided with an upper and lower material level indicator, which can display the empty state of the silo.
Silo Storage,Bolted Cement Silo,500Tons Bolted Cement Storage Silo,200Tons Bolted Bulk Cment Silo
Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.sdjzcseriesdrumconcretemixer.com