HARVEST Stainless Steel Anchor HT- V Shape Anchor
Product Technology:
Anchor is a kind of structure which joint and fix between the ceramic fiber products, insulating fire brick,amorphous refractory with the kiln metal wall plate.According to the kiln structure,furnace temperature and atmosphere,we should select and use different structures and materials anchors.Â
Character:
1.Wide temperature range,from 800C to 1400C
2.Various shapes
3.Reasonable structureÂ
4.Firm, reliable anchor
5.Install easily and quickly
Application:
1.Fix ceramic fiber modules and folded modules
2.Fix all kinds of refractory brick and cement castable
3.Anchor fiber flame plating
4.Fix and joint high temperature board and installation
More Products:
*Other materials, mensurement or shapes can be manufactured specifically to suit customer's requirements.
You are welcome to provide drawings & samples!
Packing & Shipping: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Cartons / Wooden box / Pallets etc.
Mix loading is also allowed
The hot water in the main machine room passes through the pipes, transverse pipes, curved pipes and central pipes with a certain pressure through the water pump, and circulates the water pressure into the water distribution system of the cooling tower, and evenly spreads the water on the filler through the small holes on the water distribution pipe; The dry air with low Han value enters the tower from the bottom into the air net under the action of the fan. When the hot water flows through the packing surface, it forms a water film and exchanges heat with the air. The hot air with high humidity and high Han value is extracted from the top, and the cooling water drops into the bottom basin, and flows into the main machine through the outlet pipe.
Generally, the air entering the tower is dry and low wet-bulb temperature air. There is obviously a concentration difference and kinetic energy pressure difference of water molecules between water and air. When the fan is running, under the effect of static pressure in the tower, water molecules continue to evaporate into the air and become water vapor molecules. The average kinetic energy of the remaining water molecules will be reduced, thus reducing the temperature of circulating water.
From the above analysis, it can be seen that the evaporative cooling has nothing to do with the air temperature (usually dry bulb temperature) being lower or higher than the water temperature. As long as the water molecules can continuously evaporate into the air, the water temperature will decrease. However, the evaporation of water into the air will not continue indefinitely.
When the air in contact with water is not saturated, the water molecules continuously evaporate into the air, but when the air on the water-air contact surface reaches saturation, the water molecules cannot evaporate, but are in a dynamic equilibrium state. The number of water molecules evaporated is equal to the number of water molecules returned from the air to the water, and the water temperature remains unchanged. It can be seen from this that the drier the air in contact with water, the easier it is to evaporate, and the easier it is to reduce the water temperature.
Cooling Tower,Chiller Machine,Evapco Cooling Tower,Dry Cooling Tower
Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachinery.com