Now a lot of car maintenance and tire repair shop for the sake of recruiting customers are saying that as long as I come to the shop to replace the car tires, we do four wheel alignment and balance for everyone free of charge. This is a typical bright spot, but as a vehicle owner we will not consider what the shopkeepers have recommended for us, nor have we thought of the need for doing so.
It is necessary for me to make four-wheel alignment and balancing when we finish the next change of automobile tires.
In fact, whether or not we change new tires, as long as we disassemble the car tires, we need to make a dynamic balance. Because when the tire is reinstalled on the hub, the average force will not be 100%. If we do not make a balancing act then it is very likely that with the increase in the time we are driving cars, tire wear will even cause damage to the parts of the car that are dithering. So, as long as we disassemble the car tires as much as possible to make the next move. Because in this way we can reduce the abnormal wear of the car tires, thereby increasing the life of the car tires.
If we change the new tires, we recommend doing a four-wheel alignment. Although four-wheel alignment is not a must, it is necessary to make a four-wheel alignment if the front wheel of our car has uneven tire wear. If the wear is even and the car does not run away, then the four wheel alignment can never be done. If it is evenly worn, it proves that the tire is in a normal and very good position. In fact, the four-wheel alignment is mainly to make our car go straight and in order to even wear our tires. Therefore, if the tire wears out uniformly, there is no need to do four-wheel alignment.
Featured Products
Jump Machinery (Shanghai) Limited is a modern high-tech joint stock enterprises specialized in the turn key processing line of concentrated juice, jam, pulp, tropical fruit processing, hot filling fruit drinks, herb and tea beverages, carbonated drinks, yogurt, cheese, milk and etc.
We have the best projects, professional engineers and technicians, strong R&D department with a number of masters and PhD of food engineering & packaging machinery, stable long-term development and highly rated customer experience. Our projects have been established in every province and city in China. We also steadily cooperate with our overseas clients from Africa, the Middle East, Southeast Asia, Oceania, Europe and America.
We can supply service from A to Z about your project, not only machine manufacturing, installation commissioning, technical training, after-sales service, but also before-sales service, including factory building Construction drawings,facilities layout, and water, electricity, boiler steam. We could go to your factory to help you to design the layout on your worksite and draft the implementation plan, program schedule and expense estimation in each stage of the project until you will start the project.
Featured Products,Featured Products Tomato Paste Screw Pump, Featured Products Handheld Inkjet Printer, Featured Products Cip Cleaning System For All Lines
Jump Machinery (Shanghai) Limited , https://www.shanghaimachineries.com