The National Highway Network Plan (2013-2030) was recently approved by the State Council. The reporter learned from the Provincial Highway Bureau on the 27th that the mileage of ordinary national roads in Jiangxi Province has been increased from 3,111 kilometers to 7,600 kilometers, with an additional mileage of 4,500 kilometers. According to the new plan, Jiangxi will achieve county- and county-level national road coverage, increasing the number of ordinary national roads from the existing 6 to 22, and forming a network of seven verticals and ten horizontal lines, with interprovincial channels increasing from 12 to 30. By then, Jiangxi will form a road network with reasonable layout, complete functions, and extensive coverage, and provide the public with ordinary, non-fee basic public transport services.
Cabinet Chassis Stamping Parts
Sheet metal cabinet fabrication uses a stamping process that converts hot or cold rolled steel sheet into the shape needed to manufacture parts. And it is with the following characteristics:
1. High productivity, simple operation, easy to realize mechanization and automation, especially suitable for large-scale production;
2. The stamping parts have smooth surface, stable dimensional accuracy and good interchangeability;
3. Under the condition of low material consumption, parts with high strength, high rigidity and low weight can be obtained;
4. Parts with complex shapes that are difficult or impossible to process by other processing methods can be obtained.
If you need the Metal Stamping Fabrication Service to custom cabinet chassis stamping parts, stamping steel parts, shell metal stamping parts, powershell metal stamping parts, etc., please contact us.
Cabinet Chassis Stamping Parts,Stamping Steel Parts,Shell Metal Stamping Parts,Powershell Metal Stamping Parts
Pro Success Development Limited , https://www.prosuccess-metal.com