In winter, when the car engine is difficult to start, there are often electronic control system failures. Here are several methods of testing the multimeter.
1, resistance measurement method
After the multimeter switch is turned to the proper position of the resistance (Ω) and calibrated, the resistance value can be measured. The technical status of many electrical devices on automobiles can be judged by the method of detecting the resistance value, such as checking the open circuit and short circuit of electrical components and lines.
2, DC voltage measurement method
Turn the switch to the DC voltage (V range) (choose the appropriate range) and connect the test leads to both ends of the test. The method of measuring the voltage can be used to check the voltage (signal voltage or supply voltage) at each point on the circuit and the voltage drop across the electrical components.
3, open circuit (open circuit) detection method
If there is an open circuit fault in the wiring, you can use the "check on" or "check voltage" method to determine the location of the open circuit.
"Check for continuity" method:
(1) Disconnect connectors B and C and measure the resistance between them. If the resistance value between connector A terminal 1 and connector C terminal 1 is ∞, no conduction between them (circuit breaking); if the resistance value between connector A terminal 2 and connector C terminal 2 is 0 Ω , between them conduction (no break).
(2) Disconnect the connector and measure the resistance between connector A and B, B, and C. If the resistance value between terminal 1 of connector A and terminal 1 of connector B is 0 Ω, and the resistance between terminal 1 of connector A and terminal 1 of connector B is ∞, then terminal 1 of connector A There is continuity between the terminal 1 of the connector B and the terminal 1 of the connector C and the terminal 1 of the connector C.
"Check voltage" method:
In circuits where voltage is applied to the terminals of a computer connector, an "inspection voltage" method can be used to check the open circuit fault. When the connectors are connected, in the circuit where the computer output terminal voltage is 5V, measure the terminals 1 of the connector A, the terminal 1 of the connector B, the terminal 1 of the connector C, and the body (ground) When the measured voltage is 5V, 5V, and 0V, it can be determined that the wiring between B's terminal 1 and C's terminal 1 has an open circuit fault.
4, short circuit inspection method
If the wiring is short-circuited to the ground, it can be determined by checking whether the wiring and the body (or ground) are conducting.
(1) Disconnect connectors A and C and measure the resistance between terminals 1 and 2 of the connector A and the body. If the measured resistance values ​​are 0Ω and ∞, respectively, there is a short-circuit ground fault between the wiring of terminal 1 of connection A and terminal 1 of connector C and the body.
(2) Disconnect connector B and measure the resistance between terminal 1 of connector A and terminal 1 of connector C and body (ground). If the measured resistance values ​​are ∞ and 0Ω, respectively, it can be determined that there is a short-circuit ground fault between the wiring between the terminal 1 of the connector B and the terminal 1 of the connector C and the vehicle body.
China leading manufacturers and suppliers of Meat Grinder,Meat Grinder Parts, and we are specialize in Meat Grinder Spare Parts,Stainless Steel Meat Grinder, etc.
Jiangmen Hongyi Electrical Appliance Manufacturing Co., Ltd. is a professional enterprise which aims at producing household electrical appliances. Our company is located in Jiangmen City, Guangdong Province. We are adjacent to Guangzhou, Shenzhen, Macao and Hong Kong. The transportation is very convenient.
Our company has product development, mould manufacturing, testing, product manufacturing and other departments. We have a professional team to ensure product quality. We provide quality and high performance products for clients. Our company aims to establish good and stable trade relationships with clients. Our products are exported to Southeast Asia, the Middle East and other countries and regions. We have deeply won consumer's trust.
Our main products are food mixers, blenders, electric fans, electric irons, plastic accessories and hardware.
Our company has consistently adhered to the concept of "outstanding quality, affordable price, excellent service". We hope to strengthen economic cooperation with friends from all over the world and create a bright future together.
Meat Grinder,Meat Grinder Parts,Meat Grinder Spare Parts,Stainless Steel Meat Grinder
Jiangmen HongYi Electrical Appliance Manufacturing CO.LTD , https://www.hyappliances.com