Description
1bar DN15 Aluminum Nature gas regulator without gauge
Body:casting aluminum
Bolt:SS 304 or 316
Connection:Screw
Standard:ANSI,BSEN,ASME,JIS,DIN
|
 |  |  | ||||
| Gas pressure closing regulator or filter regulator for small users. | |||||||
| Technical data: | Â | Â | Â | ||||
| ·Use: |  |  |  | ||||
| not aggressive gases of the 3 families (dry gases) | |||||||
| ·Max.working pressure: |  |  | |||||
| 0.1÷500mbar |  |  |  | ||||
| ·Setting outlet pressure |  |  | |||||
| 16÷60/20÷70/60÷200 mbar |  |  | |||||
| ·Environment temperature: |  |  | |||||
| -15÷+60 ºC |  |  |  | ||||
| Materials: | Â | Â | Â | ||||
| ·Die-cast aluminium |  |  | |||||
| ·nylon 30% glass fibre |  |  | |||||
| ·NBR rubber |  |  |  | ||||
| fig.1 | Â | Â | Â | ||||
| 1-Closing cap | Â | Â | Â | ||||
| 2-Setting regulation screw | Â | Â | |||||
| 3-Funnel | Â | Â | Â | ||||
| 4-Working diaphragm | Â | Â | |||||
| 5-Body regulator | Â | Â | Â | ||||
| 6-Pressure cap | Â | Â | Â | ||||
| 7-Filtering component | Â | Â | |||||
| 8-Fixing screws | Â | Â | Â | ||||
| 9-Obturator | Â | Â | Â | ||||
| 10-Bottom | Â | Â | Â | ||||
| 11-Bottom seal O-ring | Â | Â | |||||
| 12-Safety diaphragm | Â | Â | |||||
| 13-Regulation spring | Â | Â | |||||
| Example of Installation | Â | Â | |||||
| 1.Manual reset solenoid valve | Â | Â | |||||
| 2.Jerk handle ON/OFF valve | Â | Â | |||||
| 3.HCTR01 series filter pressure regulator | Â | ||||||
| 4.Manometer | Â | Â | Â | ||||
| 5.Gas detector | Â | Â | Â | ||||
| 6.Lever for remote ON/OFF valve control | Â | ||||||
| Overall dimensions in mm | |||||||
| connections | A | B | weight(kg) | ||||
| DN15 | 120 | 155 | 0.7 | ||||
| DN20 | 120 | 155 | 0.7 | ||||
| DN25 | 120 | 155 | 0.7 | ||||
1. Product catalogue:
2.BCTÂ Customers
Â
Â
4.Inspection and test
Â
5.Packing
Â
6.Installation and application 
Â
Â
Â
Natural Gas Regulator,gas valve ,gas regulator valve ,BCTNR07Description
1bar DN15 Aluminum Nature gas regulator without gauge
Body:casting aluminum
Bolt:SS 304 or 316
Connection:Screw
Standard:ANSI,BSEN,ASME,JIS,DIN
|
 |  |  | ||||
| Gas pressure closing regulator or filter regulator for small users. | |||||||
| Technical data: | Â | Â | Â | ||||
| ·Use: |  |  |  | ||||
| not aggressive gases of the 3 families (dry gases) | |||||||
| ·Max.working pressure: |  |  | |||||
| 0.1÷500mbar |  |  |  | ||||
| ·Setting outlet pressure |  |  | |||||
| 16÷60/20÷70/60÷200 mbar |  |  | |||||
| ·Environment temperature: |  |  | |||||
| -15÷+60 ºC |  |  |  | ||||
| Materials: | Â | Â | Â | ||||
| ·Die-cast aluminium |  |  | |||||
| ·nylon 30% glass fibre |  |  | |||||
| ·NBR rubber |  |  |  | ||||
| fig.1 | Â | Â | Â | ||||
| 1-Closing cap | Â | Â | Â | ||||
| 2-Setting regulation screw | Â | Â | |||||
| 3-Funnel | Â | Â | Â | ||||
| 4-Working diaphragm | Â | Â | |||||
| 5-Body regulator | Â | Â | Â | ||||
| 6-Pressure cap | Â | Â | Â | ||||
| 7-Filtering component | Â | Â | |||||
| 8-Fixing screws | Â | Â | Â | ||||
| 9-Obturator | Â | Â | Â | ||||
| 10-Bottom | Â | Â | Â | ||||
| 11-Bottom seal O-ring | Â | Â | |||||
| 12-Safety diaphragm | Â | Â | |||||
| 13-Regulation spring | Â | Â | |||||
| Example of Installation | Â | Â | |||||
| 1.Manual reset solenoid valve | Â | Â | |||||
| 2.Jerk handle ON/OFF valve | Â | Â | |||||
| 3.HCTR01 series filter pressure regulator | Â | ||||||
| 4.Manometer | Â | Â | Â | ||||
| 5.Gas detector | Â | Â | Â | ||||
| 6.Lever for remote ON/OFF valve control | Â | ||||||
| Overall dimensions in mm | |||||||
| connections | A | B | weight(kg) | ||||
| DN15 | 120 | 155 | 0.7 | ||||
| DN20 | 120 | 155 | 0.7 | ||||
| DN25 | 120 | 155 | 0.7 | ||||
1. Product catalogue:
2.BCTÂ Customers
Â
Â
4.Inspection and test
Â
5.Packing
Â
6.Installation and application
Â
Â
Â
CNC turning is a subtractive manufacturing process in which pieces of material are rotated as a machine tool is fed to the piece, removing material to create a finished piece. It is primarily used to manufacture parts that are cylindrical in nature. We supply custom cnc turning service and CNC turning parts manufacturing
What is CNC TURNING?
Items processed by a lathe will be cylindrical and must be on-centre. Turned parts can range from simple rings to complex curved components. CNC turning is the most efficient way to mass-produce these kinds of parts.
Various cutting tools can be installed within the lathe tooling head to perform different cutting operations sequentially, to produce parts in a one-pass process. Straight cuts, tapers and contours can all be created by varying the angle and depth of the cut.
RongNa CNC Turning system is capable of cutting and holding different types of materials with complete accuracy and efficiency. CNC Turning to manufacture anything from furniture to garden tools to intricate machines and parts for cars and trucks etc.
We are professional CNC Turning Service company and custom CNC Turning Parts manufacturers in China, Our CNC Turning Center help with all kinds of projects and makes cuts of any work piece by changing the angle, the material and the type of cutting tool being used.
Cnc Turning,Cnc Turning service,Cnc Turning Parts,Cnc Turning Services
Ningbo Rongna Technology Co.,Ltd , https://www.service-machining.com