Power Plant Circulating Water Pump-Vertical Mixed Flow Pump

OVERVIEW
HB/HX vertical mixed flow pumps are vertically suspended, single stage or mutli stage, mixed flow centrifugal pumps. With the benefits of high efficiency, broad hydraulic coverage, favourable cavitation condition etc, the pumps are widely used for pumping water from sources including lakes, cooling
ponds, tanks, rivers and oceans.

OPERATING PARAMETER
Capacity: 1152-72000m³/h
Delivery Head: 5-50m
Outlet diameter(Max): 400- 2600mm
Liquid Temperature: ≤ 55ºC

FEATURES & BENEFITS
Optimized hydraulic model, high efficiency with wide range. 
Easy installation and maintenance. 
Installation could be single or double foundation
Rotor parts could be pulled out or non-pulled out 
The impeller blade could be adjustable
The axial thrust is carried by the motor or pump
The intake sump can be wet pit or dry pit
PTFE, NBR, Thordon, AR are optional for guide bearing
Energy-saving coating, anti-cavitation coating, and anti-corrosion coating available.

 
MATERIAL
Cast Iron, Carbon Steel, Bronze
 Stainless Steel - 304 316 316L 420 
Duplex Stainless Steel - 2205  
Super Duplex Stainless Steel - 2507

APPLICATION
Water intake/ transfer for general industrial use
Fire-fighting
Sea water desalination
Water intake/ transfer for city water and sewerage works
CWP for power plant
Irrigation and drainage
River water drainage







  OVERVIEW
HB/HX vertical mixed flow pumps are vertically suspended, single stage or mutli stage, mixed flow centrifugal pumps. With the benefits of high efficiency, broad hydraulic coverage, favourable cavitation condition etc, the pumps are widely used for pumping water from sources including lakes, cooling
ponds, tanks, rivers and oceans.

OPERATING PARAMETER
Capacity: 1152-72000m³/h
Delivery Head: 5-50m
Outlet diameter(Max): 400- 2600mm
Liquid Temperature: ≤ 55ºC

FEATURES & BENEFITS
Optimized hydraulic model, high efficiency with wide range. 
Easy installation and maintenance. 
Installation could be single or double foundation
Rotor parts could be pulled out or non-pulled out 
The impeller blade could be adjustable
The axial thrust is carried by the motor or pump
The intake sump can be wet pit or dry pit
PTFE, NBR, Thordon, AR are optional for guide bearing
Energy-saving coating, anti-cavitation coating, and anti-corrosion coating available.

 
MATERIAL
Cast Iron, Carbon Steel, Bronze
 Stainless Steel - 304 316 316L 420 
Duplex Stainless Steel - 2205  
Super Duplex Stainless Steel - 2507

APPLICATION
Water intake/ transfer for general industrial use
Fire-fighting
Sea water desalination
Water intake/ transfer for city water and sewerage works
CWP for power plant
Irrigation and drainage
River water drainage







 

Truck Mounted Drilling Rig

1.Introduce of truck mounted Water Well Drilling Rig

1.Water wells multi-function rig is truck mounted type, also with air compressor on truck, easy move high efficiency and multifunction of drill hole equipment, it is mainly suitable for drilling Wells, geothermal air-conditioning hole hole and other USES.

2.2,The rig adopts the new type of hydraulic technology, supporting the rotary hydraulic motor with high torque and big diameter hydraulic oil cylinder, a factory engine to provide power for hydraulic system, two levels of intake air filter and air compressor design, prolong the service life of diesel engine.

3.Unique pump group design and convenient maintenance, reduce the maintenance cost.

4.Centralized control of the hydraulic control console, convenient operation.

5.Independent module design, can make the drilling rig is installed on the truck, to increase its mobility.

6.Combined the locator, but according to different types of drill pipe and is adjusting the

positioning tray, guarantee the positioning centering accurate and reliable.

Truck Mounted Drilling Rig,Truck Mounted Rig,Truck Mounted Auger Drill,Truck Mounted Borehole Drilling Rig

JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com