Laboratory crusher winter maintenance and precautions:
1. When the new machine is running, the transmission belt is easy to stretch. Pay attention to adjust the proper tightness of the belt to ensure the working life of the belt.
2. During the production process, the temperature rise of the bearing must be checked frequently. When the temperature rise exceeds 50 °C, the machine should be stopped for inspection to find out the cause and eliminate the fault.
3, the blade, the liner should always check the wear and tear, if it wears, the productivity will decrease, the particle size will become thicker and it will be replaced after the wear.
4. Consumable parts should be inspected frequently and replaced in time to ensure production quality and production volume.
5, the main engine and graded flow bearings are greased, using No. 2 special grease.
6. The grease replacement period of the bearing is 2000 hours. The filling amount of the grease is 1/2 or 3/4 of the space inside the bearing cavity. Do not fill the grease excessively, otherwise the bearing temperature will be too high.
7. The screw feeder has a fat-changing period of 4000 hours, plus ordinary calcium-based grease.
[Larger Area Jet Wash]3.0 GPM water flow and 360-degree jet wash support fast and powerful spinning water, add an additional 200% scrubbing ability than standard 5 color spray nozzles. Finish your clean work easier and faster with this turbo nozzle.
[One-piece Design]Unique one-piece design can be connected with the wand directly, with no tightening or maintenance required for the connector during lifetime. Avoid the problem that screws loosening of turbo nozzle under high-pressure rotation working and prevents water leaking, improves the service life of the nozzle.
[TOP Ceramic Ball]The core ball inside is the key for the turbo nozzle. This one is made of high quality ceramic ball which is much more wear resistance than metal, which spins under pressure and produces a powerful jet of oscillating water.
[High Performance] 3000 PSI Working Pressure and 32°F-140°F (0°C-60°C) Working Temperature, suitable for both hot and cold water use, and won't damage nozzle even though keep working a long time. 1/4" quick-connector, gallons per minute: 3.0 GPM, nozzle orifice size: 3.0, creates 360° powerful jet of water.
[Wide Applicability]Pressure Washer Rotating Nozzle with a rotating pinpoint stream that designed to remove stubborn dirt and grime off of the tough surface, Ideal for soiled bricks, concrete, metal or plastic tank cleaning, boat cleaning, cleaning dirty garage floors, stripping paint from the wood exterior, and removing mud and clay from highway and construction equipment.
Wand Assembly,Power Washer Assembly,Rotating Nozzle Assembly,Agricultural Spray Nozzles Assembly
Ningbo Senmiao Trading Co., Ltd. , https://www.senmiaowasher.com