How to Use Irrigation Machine Well IC Card Electricity Meter in Farmland
1. Open the terminal cover of the power meter, and then connect it according to the wiring diagram and turn on the power.
2. Multi-user three-phase prepaid energy meter implements one table multi-card, one card multi-table.
3, press the card reader, reader light is on, the display shows "————-", the user card is placed in the reader area, when the user card has electricity, the meter will read the power to the table to start power supply, display the remaining power.
4. When the user repeats the operation after 2.3 is completed, the power is read back to the user card, the remaining power in the watch is 0, and the power supply is stopped.
5. In the normal use of the prepaid energy meter, when the user uses electricity, the pulse indicator flashes. Automatically decrement the purchased electricity.
6. If the user's electrical card that is using electricity is damaged or lost, use the "reading card" to read back the remaining electricity of the user. The electricity sales system can be used as a user replacement card according to the “reading cardâ€. After the “reading card†is used, it must be initialized with the power selling system before it can continue to be used.
7. If the meter is replaced, the system will change the card, and the original table number, account number, and card number of each account will be placed in the new meter. The original user card can continue to be used.
8. When the power meter is overloaded, the meter emits a power-off control signal. The meter display shows "-E2 --" to remind the user to reduce the power load. At this time, the user should check the power condition and
9. After reducing the power load, you can use the power purchase card to read the card and you can restore the power supply.
I hope that the above analysis will benefit you. I would like to express my sincere gratitude to all old and new friends for their support and patronage. We sincerely welcome friends from all walks of life to visit us for guidance and cooperation.
Product Description
I. Some Features of XY-4-3A Drillng RigNew Condition Core Sample drill
1. Power can be electrical motor or diesel engine, as per your project needs;
2. Engine and Mud Pump,Reduction gears and Drill rig are all installed on one base, more compact structure and improve the overall rigidity;
3. Mounted in 2-wheel trailer,easy to move around when working;
4. Easy to disassemble,installed and operation, the Heaviest part is less than 100KG, convenient for maintenance and transport;
5. Using alloy bit for soft ground,using diamond bits for hard ground.
II. Customers
This hydraulic drilling rig has been successfully sold to Kenya, Peru, Chile, South Africa, Haiti, Congo, Philippines, Malysia, Gabon, Kenya, Columbia, Russia, Uganda, Panama, etc. Some of them are for personal use, some to do engineering, some trading companies. Namibia customers are used to do charity for poor children wells, we give him a big discount without any profit. You are welcomed to visit our company and factory at any time!
Xy-4-3A Drillng Rig,Drilling Machine,Drillng Rig,Engineering Drilling Rig
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com