S&A chiller for use in an optical lenses polishing machine

A customer from Nicaragua wanna purchase 3 Industrial Chiller CW-5300 and need this chiller for use in an optical lenses polishing machine which it works with water and it need to cool the water at 65Â°F more or less by 8 hours by day.There is no target time, it can be reach at 1-2 hour this is not very important.

Then yes CW-5300BH fits.

As the customer wants door to door delivery, we can send by economical DHL express but in this way (express parcel), the refrigerant inside the compressor must be drained.

Then need to refill the gas locally. Most of our customers will have a technician from a refrigeration service shop bring the service kit to come to their site to refill

the gas. Also we attach a refilling diagram for the reference and each drained chiller has a gas refilling instruction paper put in its accessories box.

CW-5300 technical parameter: http://Products/ChillerCW53001800Wco.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:

Website: http://

Custom Rapid Prototyping

Product modeling and design ability has been greatly improved, but after the completion of product design, before mass production, we must make samples to express the design idea, quickly obtain the feedback information of product design, and evaluate and demonstrate the feasibility of product design. In today's increasingly fierce market competition, time is benefit. In order to improve the competitiveness of the product market, the whole process from product development to mass production is urgently required to reduce the cost and improve the speed. The emergence of rapid prototyping technology provides an effective way to solve this problem, and has attracted much attention at home and abroad

Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com