Safety precautions to be paid when installing mining cables

1. When laying the cable, a safety officer should be set up, which is responsible for the safety of the whole process of cable laying.

2. The cable project should be specially designed on site to conduct unified command and dispatch of cable laying.

3. The construction personnel who participate in the cable laying should listen to the dispatching command of the field commander, and each of them will not be able to leave the post without authorization.

4. At the job site where the cable is laid, there should be no obstacles that affect the operation. Wear a helmet when working with other professionals.

5. When working on a high-altitude cable tray, wear non-slip shoes and fasten the seat belt to avoid falling from high altitude.

6. When laying the cable, the operator should stand on the outside of the cable and stand firm.

7. When laying cables, it is strictly forbidden to play and laugh, and never allow drunkenness to work.

8. Participate in the workforce, should be healthy, no heart, cerebrovascular diseases and high-altitude work discomfort.

9. When using electromechanical equipment to work together, the power supply of the electric equipment should be reliable. The power supply should be equipped with a leakage protection device and should be well grounded. Arrange for personnel who are familiar with the equipment to operate, and other nearby personnel should maintain a sufficient safety distance with the electric equipment.

10. When laying cables on the high-altitude cable tray, the transfer of the construction equipment items kydl_yyyq is transmitted by the transfer rope. It is strictly forbidden to throw. The ground personnel should avoid the aerial work surface and prevent the items from being bruised.

11. The safety officer shall be responsible and promptly identify potential safety hazards and eliminate and correct them. Those who refuse to obey the command and operate in violation of the rules should give warnings and stop. Avoid the occurrence of security incidents. Make sure that the cable laying operation is carried out safely and smoothly.

500t Cement Silos

This product [500t Cement Silos" is adopt chip-mounted cement silo is specially designed and developed for the difficulty of packing and the high transportation cost. The top of the warehouse is equipped with a pressure relief valve to balance the pressure inside the chamber. Prevent explosions. Each cement silo is provided with an upper and lower material level indicator, which can display the empty state of the silo.

500 Ton Cement Silo,500T Concrete Cement Silo,500T Cement Silos,500T Bolted Cement Silo

Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.sdcementsilo.com

This entry was posted in on