Steel Wall Panel and Roof Tile Roll Forming Machines

Steel roof tile and wall panel roll forming machines, cold roll forming machines, steel tile roll forming machines.


Components of whole set roll forming machines:
1. De-coiler
2. Shearing Device
3. Forming System
4. Glazed tile profiling Device and cutting device
5. Run-out Table
6. Electrical Sytem

Technological Parameters:

1. Hydraulic Un-coiler
Width of raw material: 1250mm
Max Capacity: 10000kgs
Max out diameter of coil: 1600mm
Inner diameter of coil: 500-600mm
Hydraulic feed and brake
The power of motor: 5.5kw

2. Shearing Device
Shearing way: Manual
The material of blade: Cr12 with Heat treatment HRC60-62

3. Main Forming System
Feeding width: 1219mm
Product width: 1000mm
Height of waves: 37mm
Thickness of sheet: 0.35-0.6mm
Material: GI sheet coil or Colored sheet coil
Roller stations: 18 rows
Material of Roller: C45 steel
Surface of Roller: Chrome plating
Diameter of main shaft: 80mm C45steel, modulation
Main Bearings: 60211
Power of main motor: 5.5kw Servo motor
Forming Speed: 0-15m/min

4. Glazed tile profiling device and Cutting device
Glazed tile Profiling device 1 set
Oil pump station 1set
Motor power of Oil pump station: 4kw
Forced air cooling device available
Cutting mould: 1set
Material of blade: CR12 with heat treatment HRC60-62
Pressure of cutting: 15tons
5. Run-out Table
Frame: Angle bar or steel tube welded
Length: 3m
Quantity: 1 pc
6. Electrical System
PLC and HMI touch Screen (Taiwan Delta or Siemens)
Automatic length measurement
Automatic quantity measurement
Length measurement: Rotary Encoder
Over current protection for control system, aviation plugs
Cutting off type: Paused to cut, moving automatically after cutting.
Power: 440V 60Hz

We also can design and manufacture as per your request!

Coil Nail Welder

Automatic coil nal welder is low price and good quality.

Coil Nail Welding Machine,Coil Nail Welder,Automatic Coil Nail Welding Machine,Automatic Coil Nail Welder

Dovin limited , https://www.dovinmachines.com