PCT High-Accelerated Aging Test Chamber (Dongguan Teddy) is an indispensable instrument for shortening the life test time of a product or system. PCT accelerated aging tester is mainly used for testing the product's high temperature, high humidity, and high pressure performance; It can speed up the defects or defects in the R&D and production process of exposed products, so as to better perfect the product's performance indicators.
The technical points of the PCT high-temperature, high-pressure and high-humidity aging tester include: sealing effect, safety performance, and operation mode. The following Teddy's Xiaobian explains how the PCT Saturated Steam Pressure Test Chamber meets these requirements.
1. Sealing effect: The anti-pressure PCT high-pressure aging test box designed by Teddy Company depends on the internal pressure of the box to close the box door and the inner box to achieve a good sealing effect. When the pressure inside the box is At 0.1MPa, the inner box will pull the box door with a force of 0.1 MPa just to achieve a good sealing effect, and can be easily completed without the need of extra pressure; when the pressure inside the box is 0.2MPa, the inner box will be With a suction force of 0.2 MPa, the door is sucked and sealed. The entire sealing process is basically realized by the device itself.
2. Safety performance: During the test, with the increase of the pressure inside the box, the back pressure door buckle will be automatically locked, and the box door cannot be opened, which can more effectively prevent the operator from inadvertently opening the danger when the box occurs. After the pressure inside the body has been drained, the back pressure lock will be automatically unlocked and it will really play the role of access control.
3, the operation mode: flat back pressure type door design, the user only need to turn the handle 180 degrees counterclockwise when the door is closed, the other will be automatically completed by the device. Safe, convenient, fast, effective!
For more information about PCT high-pressure accelerated aging test chamber technology, please contact: Dongguan Teddy Test Equipment Co., Ltd. Teddy is ready for you! We are always ready for you!
To obtain perfect joins, inside of the solder ring copper fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is then inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. Sizes we have available are from 8mm to 54mm For EN1254-1 and 1/2" to 2" for ASME B16.22 ,solder ring Copper Fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings
solder ring copper fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings
Taizhou Runde Company , https://www.nerausmotor.com