The national wind power equipment manufacturers that support wind energy equipment will benefit

Reporter Ni Baiming reports from the Beijing National Energy Administration that a series of large-scale wind power generation bases in Hexi Corridor in Gansu Province that have exceeded one million kilowatts to ten million kilowatts have already started construction, and Inner Mongolia grasslands have also formed many wind farms with more than one hundred thousand kilowatts. At the same time, however, some problems such as blind expansion, low efficiency, and lack of equipment manufacturing capabilities in the development of domestic wind power have gradually emerged.
According to statistics, realizing 70% of localization of wind turbines is expected to reduce the cost of wind turbines by 15%. Without changing other conditions, wind power generation costs can be reduced to 0.375 yuan/kWh. If all domestically produced wind turbines are realized, it is expected that the cost of wind turbines will be reduced by 30%. Without changing other conditions, the cost of wind power generation can be reduced to 0.332 yuan/kWh.

Experts believe that it is necessary for the state to increase the investment in scientific research and development and to improve the scientific research and development and localization of wind power technology in China. Its significance is not only to reduce the cost of wind power generation, but also to promote the formation of the wind turbine industry in China and improve the competitiveness of the international market.

According to the global wind power installed capacity statistics released by the Global Wind Energy Council (GWEC) in 2007, China added 3,449 MW, accounting for 17.2% of the new market share, ranking third in the world; cumulative installed capacity of 6,050 megawatts Ranked one place higher than 2006, ranking fifth in the world.

Earlier, the person in charge of the National Energy Administration once stated clearly that it will increase the manufacturing capacity of domestic wind power equipment and study and formulate preferential policies to encourage wind power. On August 19 this year, the Ministry of Finance issued the Interim Measures for the Administration of Special Funds for the Industrialization of Wind Power Generation Equipment (hereinafter referred to as the “Measures”).

The "Measures" pointed out that for the first 50 wind turbine generators of wind power equipment manufacturing enterprises that meet the supporting conditions, the central government will subsidize them according to the standard of 600 yuan/kW. Among the subsidy standards, machine manufacturing companies and key component manufacturing companies each accounted for 50%, and focused on the weak links in key components. The subsidy funds were mainly used for the research and development of new products.

At the same time, the "Technical Measures" determined that the technical standard to be supported is that the wind turbine's stand-alone capacity is more than 1.5 MW.

The relevant person in charge of the China Wind Energy Association stated that under the background of vigorously developing wind power in all parts of China, this move will help promote the localization of wind power equipment in China, especially the localization of core technologies.

According to the "Measures", industrialization funds are specifically used for expenditures related to the research and development of new wind power equipment. The supporting targets are Chinese and Chinese-invested companies that are engaged in the production of wind power generation equipment in China, including complete machines and blades, gear boxes, generators, converters, and bearings.

In addition, the Ministry of Finance has also stated clearly that it will adopt a “subsidy for awards” approach to support the industrialization of wind power equipment, target all market players, focus on practical results, focus on the timeliness of research and development, and minimize government approvals. Discretionary powers, the openness and transparency of policies, and the full mobilization of resources and enthusiasm in all aspects, make outstanding companies stand out.

Luxury wine  box

 

Wine paper boxes are only designed for packing wine , whisky , brandy , beer or ect --So far , we`ve made a lot of wine boxes for our current clients , such as collapsible wine boxes , magnetic book wine boxes , round tube wine boxes and etc . To prevent wine bottles from breaking , it necessary to equip with some protective material such as EVA / sponge/PS inlay to surround the bottles . Generally speaking , EVA inlay is the most expensive while PS inlay is the cheapest one.

 

Attached you will find some wine boxes we`ve made before for your reference . 


Custom-wine-paper-box


Should any of them be of interest to you , please feel free to contact us for a quotation .  It`s also welcome to share with us if you have any new idea on wine packaging , we `d love to help to carry out your ideas into perfect gift boxes .

Luxury Wine Paper Box

Luxury Wine Paper Box,Luxury Wine Gifts Box,Luxury Gift Paper Box,Custom Wine Paper Box

Huizhou Cailang Printing Products Co.,Ltd. , https://www.paperboxs.nl

This entry was posted in on