The Standing Committee of the National People's Congress recommends aggravating the penalty for drunken driving

The Standing Committee of the National People's Congress proposed to aggravate drunken driving and punishing diesel generators | Diesel Generator Price / 2010-08-26

The

The members of the Standing Committee of the National People's Congress reviewed the draft amendments to the criminal law and the draft of the intangible cultural heritage law. The two bills were first submitted to the Standing Committee of the National People's Congress for deliberation and raised public concern. Yesterday, members of the Standing Committee also focused on "drunk drunk into the punishment", "75-year-old exempt from death", "malicious arrears into the crime" and other discussions, most of whom believe that drunk driving accidents and punishments are too light, it is recommended that drunk driving should be reduced Qualified conditions and the number of crimes involving drunk driving and punishment.
- About "Death-free at age 75"
People over 75 are exempt from death
Should increase the limit
The article “The person who is 75 years old and does not apply the death penalty” is written into the draft amendment to the criminal law and is considered to be an important embodiment of our country’s leniency and strictness in legislative principles and humanitarianism. However, this has also led to worries about the worsening of the crime of elder elderly people. Yesterday, on the basis of this law, the views of the representatives were sometimes confrontation. At 75, shouldn't I be a life and death boundary?
Should ease the limits of death penalty for the elderly
>>Support perspective
Jiang Xingchang suggested that the provisions on death penalty not applicable to crimes committed by the elderly should be appropriately relaxed. He said that the provisions of the draft are positive and can better reflect the civilized and humanitarian spirit of China's criminal law, but it seems to be harsh. The proposal states that "persons 70 years of age or older are not eligible for the death penalty".
Jiang Xingchang said that because of the leniency treatment of crimes committed by the elderly, the criminal law is not clearly stipulated, but it is generally reflected in judicial practice. For people who have reached the age of 70 for many years, the court generally does not enforce the death penalty. Therefore, this amendment can be considered further and stipulates that death penalty is not applicable to people who are already 70 years old. Such legislation is more conducive to social harmony and stability.
The "75-year-old exemption" clause should not be stipulated
>> Opposition
Zhang Guiping, deputy to the NPC attending the meeting, believed that the "75-year-old exemption from death" clause should not be stipulated. She said that such clauses will play a negative guiding role for people and the crimes of the elderly will greatly increase. It may leave trouble for future judicial practice. If the elderly have committed such vicious crimes as explosions, homicides, etc., the judiciary will not be able to deal with public anger. Legislation must proceed from the reality in China and must take into account China’s historical and cultural traditions.
Lin Qiang suggested that the "75-year-old exemption from death" clause should be amended to read: "A person who has reached the age of 75 when the crime was committed does not apply the death penalty, except for the intentional killing." Lin Qiang said that from the perspective of legal dignity and legislation, from us According to the actual situation of the country, the death penalty is still applicable to the crime of intentional homicide. If the 75-year-old man is not guilty of intentional homicide and does not cause serious harm to society, the death penalty may not apply.
Avoid old people being exploited by extremist organizations
Cai Lifeng, deputy director of the Standing Committee of the Hunan Provincial People’s Congress, said that if 75-year-olds are punished by the death penalty, they are likely to be used by anti-social extremist organizations. They can inspire old people to take risks and create public safety incidents.
Cai Lifeng said that when the organs of power modify the law, they should take into account the reality of society and should take into account the strong desire of the people to strictly abide by the law and discipline and safeguard national stability and the safety of the people.
- About drunk driving into the sentence
Reducing Drunk Driving Limits, Aggravating Drunk Driving Dangers
The draft amendment to the criminal law criminalized “drunken driving” and caused concern to all parties. Yesterday, members of the Standing Committee of the National People's Congress (NPC) deliberations on this new draft article spoke on this new clause. Many members suggested that the draft amendment should reduce drunken driving conditions, and at the same time aggravate drunk driving accidents, especially causing casualties. Punishment.
The phrase "troublesome" should be deleted
>>Viewpoint
The draft stipulates that people who drove driving motor vehicles on the road or drove motor vehicles on the road to chase and race, were in bad circumstances, were detained, and were fined.
Qiao Chuanxiu suggested that the "bad circumstances" in the amendment should be deleted. The reason is that drunk driving behavior is subjective and intentional. The actual social harm and potential social harm caused by drunk driving are very significant. Therefore, regardless of whether or not the act has a bad situation, it should bear criminal responsibility, which is conducive to the effective prevention and punishment of crime.
Commissioner Bai Jingfu said that there are two problems with the expression of dangerous driving offences: drunk driving or driving a car is a criminal detention, and it is also a bad plot. The penalty is very light, drunk driving on the street is a serious harm to the public. Safe behavior is not necessarily limited to criminal detention. In addition, the draft should add provisions on how to deal with drunk driving and car accidents.
Drunk driving accidents should be counted and fined
Jiang Jian, deputy to the National People's Congress, said that drunk driving a motor vehicle and driving on the road to pursue a drive is an indirect and intentional crime. It is a behavioral offender and is also a dangerous offender. It is proposed to add a section that “causes minor injury to others to last for less than three years.” In addition to imprisonment or criminal detention, causing serious injury to another person, he shall be sentenced to fixed-term imprisonment of not less than three years but not more than seven years, and shall be sentenced to fixed-term imprisonment of not less than ten years, life imprisonment, or death penalty for causing death of another person."
Zhou Guangquan, member of the National People's Congress Law Committee attending the meeting, said that drunk driving and driving are both criminal offences. I think it is conceivable, because it is indeed in line with China's national conditions, but now the penalties are imposed on criminal detention and fines. The penalty is very light. It may be considered that the increase of “a penalty of imprisonment of one year or imprisonment below one year” can be achieved. The original intention of our legislation can also be basically achieved. Now people have a question. Before the drunk driving case in Chengdu, he later sentenced him to dangerous crimes against public safety and sentenced him to death. Now that a drunk driving dangerous driving crime is stipulated, if the prisoner is sentenced to criminal detention, ordinary people will think that the amendment to the criminal law has turned against the accused instead. At the same time, in order to ensure that there are no mistakes in judicial practice and constitute other crimes, it shall be combined with several crimes. In order to respond to the concerns of ordinary people, the criminal law cannot be changed more lightly, and it is necessary to prevent deviations in judicial practice.
Next:Installation, use and regulation of marine diesel generator sets
Prev: Shanghai has detected 2,341 crimes of bank cards this year

Shot Blasting And Cleaning Machine

Professional Shot Blasting And Cleaning Machine manufacturer is located in China, including Shot Blast Cleaning,Steel Shot Cleaning Machine,Shot Blast Cleaning Equipment, etc.

Product Usage:
The shot blasting machine uses the steel shot to be sent to the high-speed rotating disc, and uses the centrifugal force to make the high-speed thrown steel shot hit the surface of the part to achieve the purpose of polishing. The shot blasting machine can generate compressive stress on the surface of the part, Moreover, there is no silicon-containing powder, and the pollution to the environment is small.
The main uses of the shot blasting machine are as follows:
â‘ The shot blasting machine generates compressive stress on the surface of the parts, which can improve their fatigue strength and ability to resist tensile stress corrosion;
â‘¡The shot blasting machine can correct the distorted thin-walled parts;
③The process of shot blasting cleaning machine replaces the general cold and hot forming process, and the forming of large thin-walled aluminum parts can not only avoid residual tensile stress on the surface of the parts, but also obtain favorable compressive stress for the parts. It should be noted that the use temperature of the parts processed by the shot blasting machine should not be too high, otherwise the compressive stress will automatically disappear under high temperature, thus losing the expected effect. Their operating temperature is determined by the material of the parts. For general steel parts, it is about 260-290 °C, and aluminum parts are only 170 °C.

Blasting

Working principle
The shot blasting cleaning machine is realized by relying on the high-speed rotating throwing head to vigorously throw the abrasive particles to the surface of the workpiece, and there are several blades inside the throwing head.
When working, the abrasive enters the center of the throwing head through the feeding port. There is a shot dividing wheel in the center of the throwing head that rotates with the throwing head. The outside of the shot dividing wheel is a directional sleeve. Send to the end of the blade near the center of the throwing head. Due to the centrifugal force, the abrasive particles are accelerated along the length of the blade until they reach the tip of the blade and hit the workpiece surface at a very high speed.
The function of the pelletizing wheel is to correctly "feed" the abrasive to the blade according to certain requirements. Once the opening of the pelletizing wheel is seriously worn, the abrasive will hit the end of the blade, causing abnormal wear of the blade, and the divergent flow of the abrasive will become without rules. Therefore, it is necessary to regularly check the wear of the pelletizing wheel according to the requirements of the instruction manual and replace the severely worn pelletizing wheel in time.
The location of the directional sleeve opening determines where the abrasive is fed to the blades by the pelletizing wheel. The shape of the opening on the directional sleeve affects the shape of the abrasive divergence and the size of the hot zone. The so-called hot zone, even an area where the abrasive is concentrated on the abrasive diverging surface, is caused by the uneven distribution of the abrasive on the blade. The positioning of the adjustable directional sleeve can be properly adjusted according to the wear of the opening to ensure that the throwing head works in a good operating state.
The blades in the throwing head are in direct contact with the abrasive, and its quality is closely related to the performance of the throwing head.
The wear resistance of the blade directly determines the life of the blade and the operating cost of the shot blasting machine. Therefore, the blades of the blasting head must be made of high wear-resistant materials. The wear resistance of the blade is not only related to the material of the blade, but also closely related to the working conditions of the shot blasting machine. For example, if there is 1% sand in the abrasive, the life of the blade will be shortened by 80%. It is not an exaggeration to say that the life of the separation device determines the life of the shot blasting machine.
Worn or cracked blades can cause vibration when the impeller rotates at high speed. Therefore, the integrity of the blades should be checked frequently, and the defective blades should be replaced in time. In order to ensure the stability of the throwing head, the blade replacement must be carried out in pairs, that is, the blade opposite to the unsatisfactory blade must be replaced at the same time to obtain a good dynamic balance. If it is suspected that a problem with the blades is causing the throwing head to not work properly, all blades need to be replaced.
The casting defect of the blade will inevitably accelerate the wear of the blade, which is even more serious when chilled cast iron shot is used as the abrasive. After analyzing the worn blades, it is believed that the blades with casting defects will cause the abrasive particles to bounce during the movement. If there is sand in the abrasive, it will increase the wear of the blade.

Shot Blasting And Cleaning Machine,Shot Blast Cleaning,Steel Shot Cleaning Machine,Shot Blast Cleaning Equipment

Wuxi Zhouxiang Complete Set of Welding Equipment Co., Ltd. , https://www.beamweldingmachine.com

This entry was posted in on