The compressor is mainly composed of a body, a crankshaft connecting rod, a cylinder piston, an intake and exhaust valve, and the like.
When the crankshaft is running by the motor. The piston is driven to reciprocate in the cylinder through the connecting rod, and the process of compressing, exhausting, expanding and inhaling the refrigerant is completed by the cooperation of the suction and exhaust valves: (1) The compression process: the low-pressure gaseous refrigerant passes through The process of becoming a high-pressure gas state after compression is called a compression process.
When the piston moves to the lower end point (ie, the position where the piston can no longer move down), the cylinder is filled with low-pressure gaseous refrigerant, and the piston begins to move upward along the cylinder. At this time, the intake valve is closed and the internal volume of the cylinder is gradually reduced. And in a closed cylinder. The gaseous refrigerant is compressed and the pressure and temperature are gradually increased. When the pressure reaches the exhaust pressure, the exhaust valve automatically opens and begins to vent.
(2) Exhaust process: At the end of the compression process, the gaseous refrigerant begins to drain from the exhaust valve, the piston continues to move upward, the gas pressure in the cylinder no longer rises, and the exhaust gas is continuously exhausted. The exhaust process ends until the piston motion reaches the upper end point (ie, the piston can no longer move up).
(3) Expansion process: When the piston reaches the upper end point, it starts to move down the cylinder, and the exhaust valve is automatically closed. At this time, a small amount of high-pressure gas refrigerant is left in the clearance volume, and the pressure drop volume is increased. process.
(4) When the piston moves downward from the upper end point to a certain position, the residual gas refrigerant pressure in the cylinder reaches the suction pressure, the expansion process ends, and the piston continues to move downward. When the gas pressure in the cylinder is lower than the suction pressure, the suction valve is automatically opened, and the low-pressure gaseous refrigerant enters the cylinder again. When the piston moves down to the lower end point, the cylinder is filled with gas, at which point the inhalation process is completed and the next compression process is ready. The cyclic reciprocating motion is such that the low pressure gas is converted into a high pressure gas in the compressor, and the refrigerant is sent from the evaporator to the condenser.
Water Meter Test Bench
PERFORMANCE AND FEATURES:
(1) Calibration methods are all,The detecting device can support volumetric method, weighing method and comparison test scheme simultaneously.
(2) High Efficiency of production; 1,000 water flow meters can be diagnosed within 8 working hours
(3) Quick input: Input meter numbers by barcode gun; fast, accurate and convenience
(4) Energy saving including water, electricity power and manpower.
(5) Small Volume: Spaces saving, automatically, network sharing and auxiliary material save.
(6) Strong data management: Automatically diagnosis the whole procedure and come to conclusion by running software, save data of all the water flow meters and functions of diagnosis record querying, correction, statistics and print; plus network planning for multiple diagnosis equipments, set up the system of data management and query, so-called internet plus era.
(7) Innovative struction: Aluminum frame with 304SS lining, classy appearance for enhancing company image; can be integrated mobile, instead of outdated water flow meter diagnosis equipment, which cannot be moved.
(8) High expansibility: Automatic assembly line is reserved on the equipment for future upgrading. Digital and ultrasonic Water Meter is reserved as well. These functions are not available on ordinary meters.
(9) Suitable for upgrading most of outdated water meters in the country. Worth to be adopted by the administrative departments for measurement, water companies and water meter manufacturers.
Water Meter Test Bench,Weighting Method Automatic Test Bench,Test Computer System,Water Meter Reading Equipment
SUZHOU YUEDA VALVE CO., LTD. , https://www.jsyuedavalve.com