In order to produce the most wear-resistant and impact-resistant hammerhead, the material of the hammerhead should be integrated with hardness and toughness, so it is difficult to choose a material that has both hardness and toughness to make the hammerhead. Conventional hammer hammer crusher in the production of high-manganese steel will choose as a starting material, it is inexpensive, good technology, high toughness, but the hardness is not; in the course of a very short life, will not take long, it Replace it as soon as possible. High-chromium alloys are also used to make the hammer, its hardness is very strong, but not achieve toughness.
According to the analysis of the two, the technicians found that if they can combine the two and give full play to their advantages and weaken their shortcomings, can they also achieve twice the result with half the effort? With such questions, after many trials Developed the latest high-chromium alloy composite hammerhead, which not only solves the problem of high hammer loss and low wear resistance in the past, but also greatly improves the service life of the hammerhead. Due to the complicated processing technology and the high technical requirements, the composite hammerhead is based on the most advanced processing technology and technology at home and abroad to complete each production detail.
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
PVC Edge Banding,Edge Banding Pvc,Pvc U Trim Edge Banding,Pvc Edge Banding Trimmer
Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com