XG-3, XG-1, XG-02, XG-03 magnetoelectric speed sensor

XG-3, XG-1, XG-02, XG-03 magnetoelectric speed sensor

The HN70 magnetoelectric speed sensor uses the principle of electromagnetic induction to realize the speed measurement. The coil is wound around the front end of the sensor. When the gear rotates, the magnetic field line passing through the sensor coil changes, and a periodic sine wave voltage is generated in the sensor coil. By processing the count, the speed of the gear can be measured. The magnetoelectric speed sensor is a self-generating sensor, which does not require power supply, has a simple structure, stable performance, strong output signal, good anti-interference performance, easy installation and use, and can be used in harsh environments such as smoke, oil and gas, water and gas, so the application is extremely widely.

Technical Parameters:

1 Measurement range: 50 ~ 10000r / min (60 teeth)

2 output waveform: sine wave (≥50r/min)

3 output amplitude: ≥300mV at 50r/min

4 working temperature: -10 ° C ~ 120 ° C

5 wiring method: two-wire system (passive)

6 thread specifications: M16 × 1 × 80mm

7 gear specifications: modulus ≥ 2 (involute gear)

8 installation clearance: 0.5 ~ 2mm

9 weight: about 120g

XG-3, XG-1, XG-02, XG-03 magnetoelectric speed sensor



MTN/1185IC/VP-201/202 vibration speed sensor
VS-068/VS-069/VS-077/VS-079/VS-080/VS-168/VS-169/VS-177/VS-277/VS-288/VS-289/vibration speed sensor
PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70 electric absolute vibration sensor
PR6418 relative displacement sensor PR9350 inductive displacement sensor PR9376 speed sensor PR9270 acceleration sensor
TM0782A-K/TM0783A/TM0793V-K/TM079VD Vibration Sensor
SD-051/IN-081/IN-083/IN-084/IN-085/INA-081/INA-083/INA-085/DS-1051/DS-1052/DS-1053/DS-1054/SD- 052/SD-053/SD-054/SD-081/SD-083/SD-084/SD-087/SD-088/SD-089/SDH-151/SDH-154/SD-161/ SD-164/ WT-010/WT-025 eddy current axis displacement sensor shaft vibration probe
OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165 eddy current axis displacement sensor shaft vibration Probe front end
EC-001/EC-002/EC-003 eddy current axis displacement sensor shaft vibration probe extension cable
PR6422/PR6423/PR6424/PR6425/PR6426 eddy current axis displacement sensor shaft vibration probe CON011, CON021, CON031 eddy current axis displacement sensor shaft vibration probe front end
TM0105/TM0180/TM0110/TM0120/TM0393 eddy current axis displacement sensor shaft vibration probe TM0182 eddy current axis displacement sensor shaft vibration probe front end TM0181 eddy current axis displacement sensor shaft vibration probe extension cable
MMS6110 dual channel shaft vibration measurement module MMS6120 dual channel vibration measurement module MMS6210 dual channel displacement measurement module MMS6220 dual channel axis eccentricity measurement magnetoelectric speed sensor module MMS6312 dual channel speed key phase module MMS6410 dual channel cylinder expansion measurement module MMS6418 absolute relative expansion Differential measurement module MMS6831RS485 communication unit MMS6823RS485 conversion module DOPS three take two speed measurement system
PT2010/11 dual-channel casing vibration (acceleration/speed/displacement) monitoring table PT2010/21 dual-channel vibration monitoring table PT2010/22 dual-channel axial position monitoring table PT2010/25 dual-channel swing/eccentricity monitoring table PT2010/26 double Channel expansion monitoring table PT2010/51 dual channel speed monitoring table PT2010/51D dual channel speed monitoring table PT2010/53 three redundant overspeed protection table PT2010/62 dual channel housing expansion monitoring table
MMS3110 Dual Channel Shaft Transmitter MMS3120 Dual Channel Wattle Transmitter MMS 3125 Dual Channel Bearing Transmitter
MMS3210 dual channel axis displacement transmitter MMS magnetoelectric speed sensor 3311 dual channel speed key phase transmitter MMS3410 dual channel cylinder expansion transmitter
DTM10 eddy current sensor monitoring module DTM10-201 radial vibration monitoring table DTM10-202 axial displacement monitoring table
DTM10-301 Radial Vibration Monitoring Table DTM10-302 Axial Displacement Monitoring Table DTM10-501 Speed/Key Phase Monitoring Table
DTM10-502 speed / key phase monitoring table DTM20 intelligent digital chassis vibration monitoring table DTM20-101 chassis vibration monitoring table
TM900 Power ConverterTM101 Acceleration, Speed, Displacement Vibration Protection Meter TM201 Shaft Vibration Transmitter Protection Table
TM202 shaft position expansion differential transmission protection table TM301 shaft vibration transmission protection table TM302 shaft position transmission protection table
TM501 speed key phase monitoring table TM502 speed key phase monitoring table
VIBROCONTROL 800/VIBROCONTROL 868/VIBROCONTROL 869 bearing vibration switch
VIBROCONTROL 920 bearing vibration monitor VIBROCONTROL 1000 bearing vibration transmitter
VIBROCONTROL 1100/VC 1100 C01/VC 1100 C02/VC 1100 C11/VC 1100 C12 Bearing Vibration Transmitter
VIBROCONTROL 4000/VB-410/VB-420/VB-430/CI-411/CI-421/CI-431 Mechanical Protection System
VIBROCONTROL 6000/CV-114/CV-112/CV-101/BC-112/RV-117/AP-327 mechanical protection system
AS-020/AS-022/AS-030/AS-060/AS-062/AS-065/AS-070/AS-080/4391/4391E/5704/5874/5958/8315/8324/8325/8326/ 8327/8331/8332 accelerometer
330500/330525/330750/190501/9200/74712/47633/330400/330425/200350/200150/200155/350900/26530/9200/74712/47633 speed sensor

XS12JK-2PY, XS12JK-2P/Y magnetic speed sensor
SJ-2012/SJ-2031/SJ-2021/SJ-2022/SJ-2051/SJ-2052/TK77/TK81 vibration detection and protection device
SZ-4/SZ-5/SZ-6/SZ-6B/SZ-6C/SZ-6I/TRLV/TM0793V/TM079VD Magnetoelectric Vibration Speed ​​Sensor
CD-1/CD-2/CD-4/CD-4A/CD-6/CD-6A/CD-7-C/CD-7-S/CD-8/Watt Cap Vibration Sensor
CD-21-2-C/CD-21-2-S/CD-21-T/CD-21C/S/BCD-21A/CD721/WIND vibration speed sensor
MLV-9200 (16699/900)/9200/74712/47633/HT-2ZD-24/ZD25/ZDF bearing vibration speed sensor
VB-Z9500/VB-Z9600/SJ1061/SJ1062 magnetoelectric vibration speed sensor
TM0782A/TM0783A/CA-YD/YD/KD/TM0782A/WINH/MTA/PR9270/SHQ-25X/200150/200155/200157/200350/200355/CA-GT Accelerometer
LVDT Displacement Sensor 1000TD 2000TD 3000TD 4000TD 5000TD 6000TD 7000TD 8000TD 9000TD 10000TD 11000TD 12000TD

SMU9000/SMU9200/KD2300/KD2306/KD2440/KD2446/KD2446-9C/KD2446-5CM/KUDA/8000/SMU-9000/9200/KD-5100/DIT-5200/GageProx/ThreadChecker eddy current displacement sensor shaft vibration probe front Device
EP080/EP200/EP340/EP480 eddy current axis displacement sensor shaft vibration probe
ECPD/ECPD/85/ECPD/60/ECPD-2 eddy current axis displacement sensor shaft vibration probe front end
330301/330302/330303/330601/330602/330603/330604/330851/130713 eddy current axis displacement sensor shaft vibration probe
330101/330102/330103/330104/330105/330106/330140/330141/330191/330192/330193/330194/330195/330196/330197/330198 eddy current displacement sensor shaft vibration probe
330701/330702/330703/330704/330705/330706/330707/330708/330709/330710 eddy current axis displacement sensor shaft vibration probe
330901/330902/330903/330904/330905/330906/330907/330908/330909/330910 eddy current axis displacement sensor shaft vibration probe
330600/330180/330780/330850/330300/330980 eddy current axis displacement sensor shaft vibration probe front end
330630/330130/330190/330730/330854/330330/132501/330930/8200 eddy current axis displacement sensor shaft vibration probe extension cable
TR81/DWQZ/TRIN/7200/3300/PR6422/PR6423/PR6424/PR6425/PR6426/CWY-DO/8108-01/8108-02/8108-03/8111-01/8111-02/8111-03/8125- 01/8125-02/8125-03 eddy current axis displacement sensor shaft vibration probe front end
SD081082/85811/TM0180/TM0105/TM0182/WINW/QH8500/SE/CWY-DO/8300 Axial Displacement Sensor Shaft Vibration Probe Front End
KY8500/OD9000/9000XL/S2100/S2200/VB-Z9100/MLW3300/WD220/QRD/HRD/QZHF rod non-contact displacement sensor shaft vibration probe front-end
RDZW-2Na/CZQZ/RDZW-2/RDZW-2N/WB-8501C/8521C/8531C/85300-DW/Axial Displacement Monitoring and Protection Device
85350/85710/EN2000A2/HY-01/TPM/DTPM/OD9006/S2102/VRS2000A2/Axial Displacement Detection Monitor
RDZW-2Na/CZQX/RDCZ/RDCZ-2Na/85710/HY-02/DEM/DDEM/S2161A/VRS2000A5/HZWY-20A/WB-8521C Differential Monitoring and Protection Device Relative Expansion Monitor

SZCB-01/SZCB-02/SZCB-03/SZCB-0 Magnetic Speed ​​Sensor 4/PR9376/SM-10/12/14/16/T-03/SZMB-5/9/SZMB-01/SZMB-3 /SZMB-4/ZS-01/ZS-03/ZS-02/ZS-04 Reluctance Speed ​​Sensor
SZMB-5/SZMB-5-B/SZMB-5T/SZMB-7/SZMB-8/SZMB-9SZMB-9/SZMB-9-B/SZMB-10/SZMB-10/SZMB-11/SZMB-12/ SZMB-14/SZMB-16/SZMB-18/explosion-proof magnetic speed sensor
SMCB-01/SZMZ—01/SZMZ—02/S16/SMS-12/16/E12-E12S-E58A-E58S/D12-D12P/F12A-F12S-F58A-F58S/Y12AD/DSD/DSF/DSE/DSH/ Km115-1/km115-2/km115-3/km115-4/magnetic sensitive speed sensor
TD-02/TD-03/HK-16/CM16/S16/HB2032/SC12-20K/GVS/SGZP-K1/KGSS gear speed sensor
DZC-02/DZC-02A/37506A/HZQS-02A/HZQW-03A/HZC-12 tachometer
DM504/HY-ZS3/SZC-04F1/WZ-7A/IC-3A positive and negative speed detection monitoring protection table
HY-ZS3F/RTB-S/CS-3F positive and negative speed sensor
SZC-04/SZC-04B/SZC-04BG/SZC-04F/85700/85790/JMS/HY-01/XSM/DF9011/WB--8381GE/SCM-II intelligent tachometer monitoring and protection device
XJP-10B/02A/42A/XSV-01/SQY01T/MFT/SQY11-04/RAS/SKY/SZC/SQYC/CS-1/SQY01/QYDPM/SQY08TD intelligent speed digital display
AI-TEK(AIRPAX)/Tach-pak1/Tach-pak2/Tach-pak3/Tachtrol1/Tachtrol2/Tachtrol3/MV-VI/TACHPAK1/TACHPAK1/TACHPAK2/TACHPAK3 intelligent speed monitor
WZ-3C/WZ-1D/WZ-6A/AI-TEK (AIRPAX)/EN2000A3 intelligent speed measuring instrument
WZ-3C-A/WZ-3C-B/WZ-3C-C/WZ-3C-D intelligent transient tachometer
WZ-1D-A /WZ-1D-B/WZ-1D-C emergency interrupt tachometer
WZ-6A-A/WZ-6A-B/WZ-6A-C intelligent transient tachometer
WZ-7A-A/WZ-7A-B reverse alarm tachometer
HY-ZS1/HY-ZS2A/HY-BT1/HY-ZS2/HY-ZS3/HY-CS1/OD9001/S2183/S2181/Smart Tachometer
VB-Z410/VB-Z440/VB-Z470/VRS2000A7/XHF-201/WB-8581/Intelligent Speedometer
XJP-02A/XJP-02B/XJP-10B/XJP-15/XJP-16/XJP—42AB/XJP-48B/XJP-48E/XJP-71/XSZ-01/XSZ-02XJP—18B/SZC—01020304/ SZC—04KY intelligent digital speed display
DF9032/WB-8531C thermal expansion monitor SW-2/TD-2 displacement monitor 24765 housing expansion sensor
3500/3300/7200/PT2060/PT2010/RMS700/MMS3000/MMS6000/VB4000/TN8000/WIN2000/VM600/EN8000/EN9000/MV2000/MV3000/S8100/8500/9000/ZXP-JK6600/S32000/S36000/8000B Series Rotating Machinery Monitoring protection device
XJTM-02 type display alarm

1. high degree of automation: the whole production line adopts PLC computer automation control. realized the automatic templates. automatic demoulding agent. coating ingredients. automatic sizing. automatic cloth shop. automatic flat. automatic cutting. automatic picking. automatic pressure plate and other automation function.
2. high output: this production line production speed is adjustable. class output between 1500 and 2600. can be adjusted for production according to the market situation.
3. the specifications of the plate is adjustable. can produce various specifications of 2-40 mm plate. if you have special requirements. can be customized equipment.
4. it can produce many kinds of products: glass magnesium tablet. flue sheet. composite central air-conditioning ventilation pipe plate. strengthen glass magnesium tablet. vitrified microsphere particles insulation board. polystyrene particles insulation board. partition panel. wall insulation board and other products.
5. decrease labor: the whole production line adopts PLC computer automation control. 6 people can complete the production task of the whole line. and the intensity of labor is low.
6. precise specification adjustment: each thickness control roller are controlled by digital display. adjust speed. according to the production requirements for the adjustment of the thickness of different specifications. high precision of adjustment.
7. automatic cutting separation: using intelligent cutting system. according to the specifications. automatic cutting and a variety of specifications of products. reduce the amount of labor. improved the precision of products. ensure the production line production quickly.
8, the automatic cleaning template: production line is equipped with automatic cleaning template system. product template is back after logging off and clean like new. Products after demoulding. with dedicated template automatic cleaning equipment for double-sided cleaning template again. to ensure that the thickness of the plank product with precision.
9. automatic unloading board: fully automatic intelligent discharge plate. reduce the labor intensity of workers. prolong the service life of the template. reduce the damage to the plate.
10. automatic pallet packing: according to customer requirements can be realized more specifications. product quantity of pallet packaging.
11. concentrated dust collecting: the whole process of production and the subsequent finishing all have dust removal dust collecting device. to ensure the production of clean environment. reduce the pollution. improve the appearance of the image of enterprises. and collect the dust can be used again. reduce the production cost.
Bo magnesium fire board equipment parameters:

Fire Prevention Board Machine Straw Door Equipment

Composite Wallboard Production Line, Insulation Board Production Line, Lightweight Partition Board Production Line

Shandong Qufu Xingbang Heavy Equipment Co., Ltd. , http://www.chinaxingbangheavyindustry.com