China Venttk Manufacturer Industrial Water Chiller

Product Introduction
 Clean Energy
The unit is driven by clean energy--natural gas with less combustion exhaust and contamination, which
dramatically reduces greenhouse effect and is beneficial to energy reconstruction.
Peak Load Shifting
Air conditioner requires sharp increase of electricity supply, while gas fired chiller facilitates the electricity and gas
peak load shifting, which reduces the tension of electricity/gas supply network and operation cost.
Natural Working Medium
It adopts MR717 as working medium, no harm to ozone instead of fluoro-containing refrigerant.
Ultra-high Temperature Cooling
The chiller can operate stably under the ambient temperature which can be up to 55°C, to provide users a
comfortable living and working space.
Ultra-low Temperature Heating
The heat pump can operate stably under the ambient temperature which can be down to -20°C, to provide users
living and working space as warm as in spring.
Cooler or Freezer? Cooler and Freezer!
The chiller not only can be used as air conditioner for residential & commercial comfort, but also provide a
freezing environment that is below 0°C for industrial cold storage.
High Temperature Hot Water
The heat pump produces hot water up to 65°C for air conditioning, floor heating, DHW (domestic hot water) and
swimming pool, etc.
Inverter Technology, Energy Saving
DC inverter motor could adjust fan speed automatically according to ambient temperature to reduce energy
consumption and running cost. 
 
Feature
 
 
 
STRUCTURE
 
Panels and frame are made from galvanized steel protectedwith polyester powder painting to ensure total resistance toatmospheric agents.
 
 
 
HERMETIC COMPRESSORS
 
Single phase type (mod. 6.5÷8) and 3-phase (mod.10÷50)scroll type compressors, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration
 
dampers.
 
EVAPORATOR
 
High efficiency tube in tube heat exchanger(mod.6.5÷50),shell and tube heat exchanger (mod.65÷210), factory insulated with flexible close cell material.
 
CONDENSER
 
High efficiency tube in tube heat exchanger(mod.6.5÷50),shell and tube heat exchanger (mod.65÷210), factoryinsulated with flexible close cell material.
 
REFRIGERANT CIRCUIT
 
Copper tube connection with charge valves, filter,thermostatic expansion valve, gas-liquid separator, high pressure switch and low pressure switch.The heat pump units are complete also with 4-way valve
 
and one way valve.
 
HYDRAULIC CIRCUIT
 
No build in water circuit as standard.
 
ELECTRIC PANEL
 
Consists of:
 
Compressor contactor,
 
Compressor protection breaker,
 
Microprocessor with function display.
  
Advantages
 
One of the outstanding advantages is that VICOT absorption line products adopt GAX cycle.
It includes generator, absorber, condenser,evaporator, solution pump as well as several heat exchangers to attain the high-efficiency performance.
These heat exchangers consist of Generator-Absorber Heat Exchanger (GAX), Adiabatic Section, Generator Heat Exchanger (GHX), Rectifier and Subcooler
 
 
Technical Data
 
 
NOTE
 
Performance values refer to the following conditions:
Cooling capacity: Source side water inlet/outlet temperature 18ºC/29ºC, user side water inlet/outlet temperature12ºC/7ºC.
Heating capacity: Source side water inlet temperature 15ºC, user side water inlet temperature 40ºC.
Sound pressure measured at a distance of 1 m and a height of 1.5 m above the ground in a dear field.
 



 
Note: for further information please contact me.

Ms. Echo Lee

Tel: +86 21 35324169-206 

Mob: +86 18217219074
 
 

  Product Introduction
 Clean Energy
The unit is driven by clean energy--natural gas with less combustion exhaust and contamination, which
dramatically reduces greenhouse effect and is beneficial to energy reconstruction.
Peak Load Shifting
Air conditioner requires sharp increase of electricity supply, while gas fired chiller facilitates the electricity and gas
peak load shifting, which reduces the tension of electricity/gas supply network and operation cost.
Natural Working Medium
It adopts MR717 as working medium, no harm to ozone instead of fluoro-containing refrigerant.
Ultra-high Temperature Cooling
The chiller can operate stably under the ambient temperature which can be up to 55°C, to provide users a
comfortable living and working space.
Ultra-low Temperature Heating
The heat pump can operate stably under the ambient temperature which can be down to -20°C, to provide users
living and working space as warm as in spring.
Cooler or Freezer? Cooler and Freezer!
The chiller not only can be used as air conditioner for residential & commercial comfort, but also provide a
freezing environment that is below 0°C for industrial cold storage.
High Temperature Hot Water
The heat pump produces hot water up to 65°C for air conditioning, floor heating, DHW (domestic hot water) and
swimming pool, etc.
Inverter Technology, Energy Saving
DC inverter motor could adjust fan speed automatically according to ambient temperature to reduce energy
consumption and running cost. 
 
Feature
 
 
 
STRUCTURE
 
Panels and frame are made from galvanized steel protectedwith polyester powder painting to ensure total resistance toatmospheric agents.
 
 
 
HERMETIC COMPRESSORS
 
Single phase type (mod. 6.5÷8) and 3-phase (mod.10÷50)scroll type compressors, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration
 
dampers.
 
EVAPORATOR
 
High efficiency tube in tube heat exchanger(mod.6.5÷50),shell and tube heat exchanger (mod.65÷210), factory insulated with flexible close cell material.
 
CONDENSER
 
High efficiency tube in tube heat exchanger(mod.6.5÷50),shell and tube heat exchanger (mod.65÷210), factoryinsulated with flexible close cell material.
 
REFRIGERANT CIRCUIT
 
Copper tube connection with charge valves, filter,thermostatic expansion valve, gas-liquid separator, high pressure switch and low pressure switch.The heat pump units are complete also with 4-way valve
 
and one way valve.
 
HYDRAULIC CIRCUIT
 
No build in water circuit as standard.
 
ELECTRIC PANEL
 
Consists of:
 
Compressor contactor,
 
Compressor protection breaker,
 
Microprocessor with function display.
  
Advantages
 
One of the outstanding advantages is that VICOT absorption line products adopt GAX cycle.
It includes generator, absorber, condenser,evaporator, solution pump as well as several heat exchangers to attain the high-efficiency performance.
These heat exchangers consist of Generator-Absorber Heat Exchanger (GAX), Adiabatic Section, Generator Heat Exchanger (GHX), Rectifier and Subcooler
 
 
Technical Data
 
 
NOTE
 
Performance values refer to the following conditions:
Cooling capacity: Source side water inlet/outlet temperature 18ºC/29ºC, user side water inlet/outlet temperature12ºC/7ºC.
Heating capacity: Source side water inlet temperature 15ºC, user side water inlet temperature 40ºC.
Sound pressure measured at a distance of 1 m and a height of 1.5 m above the ground in a dear field.
 



 
Note: for further information please contact me.

Ms. Echo Lee

Tel: +86 21 35324169-206 

Mob: +86 18217219074
 
 

 

Vertical Winding Machine

Functional features:

The machine is made up of a stepless speed variable winding chuck and a hydraulic lifting platform. No any pit should be construced in foundation and the chuck need not lift. According to customer requirements can be arranged into a pie wire, tensioning unit, accessories and operators could load on the platform, which enables a constant operating altitude. This machine is suitable for regions wit high level of underground water or workshop unsuitable for pit.

Application:

Over floor vertical winding machine is applied to coil winding for large and middle capacity transformers.

Wire Winding Machine,Vertical Winding Machine,Wire Cutting Machine,Automatic Vertical Winding Machine

JINAN EURO-ASIA MACHINERY CO., LTD , https://www.euroasiamachine.com