Inspection of thrust bearings after installation

When installing a thrust bearing, check the verticality of the shaft ring and the centerline of the shaft. The method is to fix the dial gauge to the end surface of the casing, so that the contact of the table top rotates the bearing on the bearing shaft raceway, and observes the dial gauge pointer. If the pointer is yawed, the shaft circle and the shaft center line are not perpendicular. When the case hole is deep, it can also be tested with an extended dial gauge.

When the thrust bearing is installed correctly, the seat ring can automatically adapt to the rolling of the rolling elements, ensuring that the rolling elements are located in the upper and lower ring raceways. If the installation is reversed, not only will the bearing work abnormally, but the mating surfaces will be severely worn. Since the difference between the shaft ring and the seat ring is not obvious, the assembly should be extra careful and do not make mistakes. In addition, there should be a gap of 0. 2-0. 5mm between the seat ring of the thrust bearing and the bearing housing hole to compensate for the error caused by inaccurate machining and installation. When the center of the bearing ring is offset during operation This gap ensures that it is automatically adjusted to avoid friction and normal operation. Otherwise, it will cause severe damage to the bearing.

Custom Flag

We equipped with advance automatic screen printing machine, inkjet screen making machine, autowashing & heatsetting machine which allow us to make the Flag size up to 2*6 meters with 7 colors. Our factory occupy the area of 3000 square meters, employ about 200 works,provide the production daily capacity for 12000 ~15000 square meters. To protect the environment,we also build the water recycling system according to the standard of national environment protection. With the reputation of products quality and creditability since settled, we have made the project of supplying flags for: the 10th national Games of china, the world table-tennis Championships, 2004 Athens Olympic games, 2008 Euro-Championships, 2008 Beijing Olympic Games and Vancouver 2010 White Olympic Games. As a leading manufactory certificated by ISO9001 in china,we are known as the best quality, the reasonable price, and the fastest delivery. Now our products already exported to all around world ,such as:Germany , Sweden , Switzerland, Belgium, Iceland ,Canada, Australia ,USA,UK,UAE,HongKong an Macao. We will always assure of you to provide the best quality and service. Welcome to contact us,for any question, in any time!

wall flags australia,teardrop flags australia,teardrop flags brisbane

FlagKing Flags Manufacturing Co.,Limited , https://www.cnflagking.com