Products Name:WQ sewage pump
Application:
WQ type sewage pumps widely used in agriculture, architecture,
mine, environment protection and industry, such as drainage slurry,
waste water, which contained short fibre, long fibre, wastepaper,
sand and so on, it is also an ideal equipment for irrigation.
Operating conditions:
1,The maximum deep it is allowed in water is 5m from its center of impeller;
2,Max. medium temperature: +40
3,Trans medium's PH:4-10;
4,Kinematics viscosity of the trans medium is:7*10-7-23*10-8m2/s;
5,Density of the trans medium limit;1.2*103kg/m3;*The solid diameter is about35mm.
Motor:
1,Closed, externally ventilated
2,Insulation Class B
3,Protection IP68
Material:
1,Pump body: Cast iron
2,Impeller: Superior steel / Cast iron
3,Shaft with rotor: Superior steel
4,Mechanical seal: Stainless steel/Carbon-ceramic
5,Thermal protector
6,Motor housing:Stainless steel
7,Single phase 220V-230V/50Hz
8,Three phase 380V/50Hz
9,Three phase 220V/440/60Hz if request
Products Name:WQ sewage pump
Application:
WQ type sewage pumps widely used in agriculture, architecture,
mine, environment protection and industry, such as drainage slurry,
waste water, which contained short fibre, long fibre, wastepaper,
sand and so on, it is also an ideal equipment for irrigation.
Operating conditions:
1,The maximum deep it is allowed in water is 5m from its center of impeller;
2,Max. medium temperature: +40
3,Trans medium's PH:4-10;
4,Kinematics viscosity of the trans medium is:7*10-7-23*10-8m2/s;
5,Density of the trans medium limit;1.2*103kg/m3;*The solid diameter is about35mm.
Motor:
1,Closed, externally ventilated
2,Insulation Class B
3,Protection IP68
Material:
1,Pump body: Cast iron
2,Impeller: Superior steel / Cast iron
3,Shaft with rotor: Superior steel
4,Mechanical seal: Stainless steel/Carbon-ceramic
5,Thermal protector
6,Motor housing:Stainless steel
7,Single phase 220V-230V/50Hz
8,Three phase 380V/50Hz
9,Three phase 220V/440/60Hz if request
The main components of Shine Core Veneer Dryer is as follows:1.Drying system :the Veneer Dryer adopts the most scientific drying principle ,and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows, so that the veneer is heated evenly and thus plays the role of drying 2.Control system: Adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect. 3.Transmission system :the veneer is fed into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying and ironing. So the veneer dried by this machine is flat, smooth and without marks. 4.Heating system:Steam heating, heat conduction oil heating, hot stove type heating,waste wood or other biomass materials. Users can choose one most suitable model. but biomass fuel is the most economic one which can save the drying cost to the user to the most .
Core Veneer Dryer
Branch Shredder,Core Veneer Dryer,Plywood Veneer Dryer,Plywood Veneer Dryer Machine
Shandong Shine Machinery Co.,Ltd , https://www.shinewoodmachine.com