Vehicle name | Low-density powder material transporter | | |
Fuel Notice | Yes | ||
company address | No. 99 , West District, Jiefang Road, Suizhou, Hubei Province | ||
Manufacturer | Xiagong Chusheng Special Purpose Vehicle Co., Ltd. | ||
Announcement batch / release date | 2001m9 229/20110919 | ||
engine model | WP10.270 | ||
Engine power | 199 ( 270 horsepower) | ||
engine capacity | 9726 | ||
Engine manufacturer | Weichai Power Co., Ltd. | ||
Overall size ( length / width / height ) | 11100 × 2500 × 3980 | Cargo bed ( length / width / height ) |  × × |
Total mass (Kg) | 25000 | Load quality utilization factor | Â |
Service quality (kg) | 13205 | Rated load mass (kg) | 11600,11665 |
Rated passenger ( person ) | Â | Front passenger ( person ) | 3,2 |
Approach angle / departure angle | 18/11 | Front suspension / rear suspension | 1525/3025,1525/3000 |
Wheelbase (mm) | 5200+1350,5175+1400 | Axle load | 7000/18000 ( with two axes installed ) |
Number of axes | 3 | Number of springs | 9/12, 10/12, 4/12, 4/5 |
Number of tires | 10 | Tire specifications | 12.00R20 |
Front track | 2036 | Rear track | 1800/1800,1860/1860 |
Steering Type | steering wheel | Maximum speed | 90 |
Chassis configuration | Using SX5255GFLNN524 type chassis design and production, lengthen the top cab, Weichai 270 horsepower high pressure common rail engine, 12.00R20 wire tires, 13 tons of Sylbridge , Shanbei 9- speed gearbox, with original air conditioning. | ||
Dedicated configuration | The actual volume of the tank is 37 cubic meters , and the tank's external dimensions ( straight section length * maximum diameter ) (mm):7700*2500 . The cylinder body and the head are made of 6mm thick high-quality carbon steel plate, Anhui Wuhu air compressor and Sancun fluidized bed structure. | ||
Compression molding is a manufacturing process that uses a cavity half and a core half of a mold to form material into a specific shape created by the two mold halves. Compression molds vary depending on the material being compressed and the dictates of the type of mold required.
Typically, a compression mold is mounted in a vertical press (unlike the horizontal presses that are prevalent in the Injection Molding process). Compression molding often requires that the [charge" of material be loaded into the mold, either manually or automatically, prior to the mold halves closing.
- The loss of raw materials is small and will not cause too much loss (usually 2% to 5% of the product quality).
- The shrinkage of the product is small and the repeatability is good.
- A mold with a large number of cavities can be placed on a given template, and the productivity is high.
- It can be adapted to automatic feeding and automatic removal of products.
- High production efficiency, easy to realize specialized and automated production.
- The product has high dimensional accuracy and good repeatability.
- The surface is smooth and clean without secondary modification.
- Products with complex structures can be formed at one time.
- Mass production, relatively low price.
we ever did many compression silicon parts , the hardness from 30shore A till 80shore A, colors can be customized whatever you want, we can do the compound color for you. Several free samples for the review before the overall demand running to ensure everything is clear and aligned to go. Please contact us for the professional suggestions, we have been in this field for more than 15years. thanks.
Compression Molding,Compression Forming,Rubber Compression Molding,Compression Moulding Process
Suzhou FCE precision electronics Co., LTD , https://www.fukeyifcesz.com