First, the parking lot can not rise and fall Barrier <br> <br> maintenance methods: 1, first check whether the electricity, without the burnt fuse, if the fuse melting off, have to do a comprehensive inspection.
2. Unplug the underground cable plug in the communication room and measure if the three red, white and yellow wires of the motor are connected. If they are the same, the red, white and yellow wires in the underground cable are disconnected; The three wires are measured at the plug connected to the head. If they are connected, the line from the end of the door to the communication room is broken (including the poor contact of the plugs). If it is still unreasonable, directly measure whether the motor stator coil is open circuited.
3, motor lead only red, yellow, and white, respectively, and white, respectively, to see if the motor stator is hot, if the hot powerful, indicating that the motor thermal shutdown can not be switched off, if not hot, check 20UF start capacitor is invalid.
4, the motor is still good or not switch, and then measure the blue, green, gray three limit signal line is short circuit.
5, motor line, signal line is good, or can not be switched, indicating that the control box is faulty.
Second, the parking barrier switch failure
Maintenance method: First test whether the motor red (yellow) color and white line are connected, and then measure whether the blue and gray (green) color signal lines and the K2 (K1) sensor switch are short-circuited.
Third, the parking switch but can not stop Barrier <br> <br> repair method: Description motor can switch the line red, white, yellow three lines there is no problem, the signal line is not short-circuited. The main reason is that the limit signal is not sent to the controller or the controller limit function is bad.
Fourth, Parking Barrier does not automatically shut down <br> <br> maintenance methods: 1, limit sensors K1, K2 while open. 2, the public line blue circuit. 3, check the controller is broken.
Fifth, the process operation is often shaking parking Barrier Repair <br> <br>: Check brake lever length (by weight) and the tension spring is installed or not, whether proportional
VI Barrier parking brake lever kept in place repair method <br> <br>: 1, bad thyristor control box: a plug control box, automatically run, be worn SCR described.
2. The switch is not in position: Turn the lever to the off position or open position with the handle by hand, and use a multimeter to measure whether the output voltage of the off-position or on-position has changed. If not, the Hall switch is bad.
3. The switch is not in good contact with the unfabricated box plug: Open the gate gate and use the meter to measure the positive and negative voltage of the photoelectric switch. If not, the connector has a problem and must be checked.
Seven, after the power is still not running parking Barrier repair method <br> <br>: 1, no output voltage control box: see whether the blown fuse box control; see whether the electronic components on the control panel for obvious damage, If there is, please contact the dealer or our company's after-sales service department for maintenance.
2. The capacitor is bad: After pressing the ON/OFF button, the motor vibrates and does not operate. It may be a bad starting capacitor and should be replaced.
3, the motor burns out: The distinguishing method measures whether the two lead wires of the electrical machinery lead through; The smell of insulating paint is strong.
4, switch long-term conduction: pull off the power switch plug-in, gate can open and close, plug in the plug-in switch will not work, indicating that the switch is broken.
5, belt off: find out the door to see if the belt is worn.
Barriers, also known as stoppers, were originally introduced from abroad and were used as a gateway access control device for restricting the movement of motor vehicles on roads. They are now widely used in highway toll stations and car parks to manage vehicle access for the management of vehicle access. Its appearance on a large scale has brought convenience to people's lives. The application of barriers is not only conducive to people's better management of passing vehicles, but also can save a lot of tedious details and allow people to manage vehicles in and out. When entering, it is more convenient and effective.
Although parking lot barriers give us more convenient and quicker management, we can make the access to vehicles more orderly. However, for the later use of Daozha, it also needs a lot of attention, some common faults are still good for timely maintenance, of course, is also very important for daily maintenance. Parking barriers bring more than just a means of management and measures, but also effectively provide security and social civilization.
Drida, a manufacturer of parking management systems, focuses on parking for 15 years! If you have any problems with the parking system
Commcrcial Vchicle Nylon PA Tube
Changchun FAW Sihuan Automobile Pipeline Co., Ltd
The original intention drives us to persist in innovation and achieve transcendence;
Our mission is to promote our continuous progress and excellence.
We will make our products to the extreme, and the Viewport Monument is the life of the enterprise,
Become a reliable one-stop professional supplier of automotive pipeline products.
Rooted in the northeast, it radiates across the country.Sihuan Pipeline Company, integrating R&D, design, production, experiment and testing, has been specialized in producing nylon gas transmission pipeline, fuel pipeline and high-pressure pipeline products for 20 years.At present, the enterprise has nearly 40000 square meters of modern production workshops and business office buildings, more than 200 senior employees, and an annual output of 56 million automobile
pipeline products.Its subsidiaries are located in Chengdu, Qingdao, Ma'anshan, Jinan, Foshan and other cities. Yuncheng Branch is under preparation to meet the needs of customers in different regions.
Innovative fusion, leading technology
<R&D>
Sihuan Pipeline Co., Ltd. takes technological innovation as its eternal pursuit, and has accumulated profound technical information through 20 years of scientific research, providing the most advanced technical support for each product project.The company has been recognized by the municipal technology center and participated in the revision of several national standards and industrial standards.The scientific research team has reached cooperation with Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun University of Technology and other scientific research institutes, jointly developed a number of provincial science and technology department projects, and achieved a number of technical achievements.The testing laboratory has passed the ISO17025 laboratory management system certification. It has more than 40 sets of tube performance testing equipment and raw material testing instruments, and the testing means are
internationally leading.
Lean production, better quality than gold
<Production>
Sihuan Pipeline Company, based on the industry trend, formulates equipment procurement plans every year and continues to introduce world-class production equipment. Now, it has several automatic extrusion production lines in Merafil, Switzerland, as well as international top equipment such as Clarke bellows molding machine in France, Opel shrink pipe machine in Italy, which are stable, efficient, highly accurate, meet the diversified needs of the main engine factory, and achieve the brand charm of Sihuan.
Scientific management, safeguard quality.The production department implements a quality control system higher than the national standard, adopts 6S management on the site, regularly carries out personnel training, and constantly improves the process procedures.The quality inspection department must inspect every product and every process, resolutely put an end to the delivery of substandard products, and strive to promote product quality to the highest standards in the industry.
Four ring quality, famous throughout the country
<Products>
The products produced by Sihuan Pipeline Company are related to brake systems (including vacuum brake pipes, air brake pipes, spiral pipes, rear axle brake pipes);Fuel system (cover to atmospheric ash filter pipe, fuel pipe, crankcase vent pipe, vacuum pipe);New energy thermal management system and industrial energy storage water inlet and return pipeline assembly integrate safety functions such as check valve, flow regulating valve and exhaust valve, which directly affect vehicle performance and are prerequisites for safe driving;SCR system (including electric heating urea pipe, cooling water pipe and gas pipeline);High pressure pipeline products are used in clutch power assist system and hydraulic lifting pipeline. Excellent performance, stable physical performance, excellent chemical resistance, good processing performance and long service life.All products have passed the CQC certification, and all parameters tested in the laboratory are far higher than the national standards and industry standards.
After 20 years of hard work, Sihuan Pipeline Company has won recognition from all walks of life. It has successively won honorary titles such as "Jilin Province Small Giant Enterprise in Science and Technology", "High tech Enterprise Certificate", Changchun "Specialized, Special and New" SMEs. Its products are
now available to FAW Jiefang, FAW Pentium, Heavy Duty Truck Group, CIMC, Rolls Royce, Yapu, Sany Heavy Industry, GeelyContinental Group and other well-known enterprises are A-level suppliers of FAW Jiefang and other OEMs, and excellent suppliers of Anhui Valin.
In the future, Sihuan Pipeline Co., Ltd. will cater to the national carbon peak strategy, research and develop low emission pipeline manufacturing technology in a forward-looking manner, provide customers with high-quality products and services with innovation and quality, and create a better future for the automotive industry!
Nylon Pa Tube,PA11 Hose,Nylon Fuel tube ,Braided Fuel Line
Changchun FAW Sihuan Automobile Pipe Co,Ltd , https://www.fpcpfuelpipe.com