As we all know, hot air flows upwards. If the heater is hung too high, the heat at the top of the room is easily concentrated. The actual temperature felt by the person is lower than the design temperature, which not only causes energy waste, but also increases the user's heating cost.
Although the new radiator is highly adaptable and can be placed in any corner of the room, from the perspective of obtaining the best heating effect, it should be placed in a place with strong “cold radiation†such as under the window. Because the temperature of the windows in the room is the lowest, the descending air currents are mostly concentrated in this area. If a properly sized radiator is installed under the windows, cold radiation and cold air circulation can be prevented. When people approach cold windows, they do not noticeably feel Cold air intrusion. Especially in the rooms with floor-to-ceiling windows and large bay windows, short heat sinks are installed under the windows to enhance thermal comfort. If narrow and high heat sinks are used and installed on the side walls, not only the temperature distribution is uneven, but also cold air flow will be reduced, thus reducing comfort.
In some rooms without windows, heating can be installed near people's regular activities. For example, the heating of the bathroom can be installed next to the shower or toilet, but the position must be slightly lower, so as to increase comfort.
Water seepage often occurs in connection between radiators and plastic pipes. In addition, if there is a place where the copper joint is connected, the heating coil buried in the floor should pay more attention. There are no good methods for how to deal with seepage problems. In the procurement of recommended materials, the standards for the collection and the water separator must be implemented in accordance with the specifications. Especially in the operation of the system, maintenance and repair measures should be strengthened.
Arc Toothed Rubber Timing Belt
Industrial synchronous belt applies the superior synthetic neoprene imported
from Japan as main raw material. It matches with multiple auxiliary materials with
various uses. Skeleton uses the superior glass fiber cord imported from japan. Tooth
face of the belt adopts nylon 66 high spandex for protection.
Synchronous belt drive is a novel drive mode that utilizes pulley gear meshing to
transfer motive power. It has accurate synchronous drive function. It needs no
lubrication without slip differential nor pollution and with little noise. Drive efficiency
reaches to 0.98. Speed ratio range can fulfill 1:10. Allowable linear speed can attain
50m/s. Drive efficiency ranges from several hundred watts to several kilowatts. It
suits multi-axial drive. It features as fine dynamic flex resistance, good anti-cracking
properties, superior ozone-proof performanca, sound heat-resistance and wearability etc.
Arc Toothed Rubber Timing Belt,Coated Timing Belts,Rubber Flat Belt,Rubber Conveyor Belt
Jiangsu Bailite Transmission Technology Co., Ltd , https://www.bailitebelt.com