QBY3 pneumatic diaphragm pump is a new generation of products. Reliable quality and long life, low noise, small vibration, never crash, fine workmanship and other six major advantages.
1, the appearance of beautiful, the pickling process is made, do not have to worry about in the delivery of food-grade paint off trouble;
2, the valve with built-in installation, so that the pump is running, will not produce crashes; pump smaller, easy to move.
3, the pump without irrigation, suction up to 5 meters, lift up to 70 meters, the outlet pressure? 7bar;
4, spacious flow, through the good performance, allowing the maximum particle diameter up to 10 mm. Pumping mud, impurities, the pump wear little;
5, head, flow can be achieved through the valve opening stepless adjustment (pressure regulation between 1-7bar
6, Membrane sheet with imported plastic diaphragm and Teflon diaphragm, corrosion-resistant, long life
7, the pump without rotating parts, there is no shaft seal, diaphragm and other pumping media and pump moving parts, the workpiece media completely separated, the media will not be transported to the outside leakage. So pumping toxic, volatile or corrosive media, will not cause environmental pollution and endanger personal safety
8, simple structure, less wearing parts, the pump structure is simple, easy installation, maintenance, pump delivery medium will not come into contact with the valve, connecting rod and other moving parts, unlike other types of pumps due to rotor, piston, gear , Leaves and other parts of the wear and tear and gradually decline in performance
9, can transport a more viscous liquid (viscosity of 10,000 centipoise below);
10, the pump without oil lubrication, even idling, the pump has no effect, which is a major feature of the pump;
More Keyword Search: Diaphragm Pumps
The air we breathe is about 21% oxygen. Oxygen for industrial use is generated by separating oxygen molecules from the other molecules within a clean, dry compressed air stream. Pressure Swing Adsorption (PSA) is a simple, reliable and cost-effective technology that enables continuous, high-capacity oxygen flow at the desired level of purity. Adsorption happens when atoms, ions or molecules from a substance (compressed air in this case) adhere to a surface of an adsorbent. PSA technology isolates oxygen molecules from other molecules (nitrogen, CO2, water vapor and trace gases) to leave high purity oxygen at the outlet of the generator. The process takes place in two separate pressure vessels (tower A and tower B), each filled with a carbon molecular sieve, that switch between a separation process and a regeneration process.
Common Industries Using Oxygen:
• Aquaculture & Fish Farming
• Cable & Optical Fiber
• Chemicals
• Fire Prevention
• Food & Beverage
• Glass
• Gold and silver Mining/Extraction
• Laser Cutting
• Metal Heat Treatment
• Oxyfuel Combustion
• Pulp & paper
• Pharmaceuticals
• Plastic injection molding
• Semiconductors
• Steel
• Wastewater treatment
Oxygen Generator for General Industry,Oxygen Gas Generator
Suzhou Xinrui Purification Equipment Co.,Ltd , https://www.gas-equipment.net