Analysis of the cause of failure of the cone crusher seal

Since the cone crusher is aimed at stone, due to its operating principle, many dusts are inevitably generated during operation. Therefore, a corresponding sealing device must be provided. However, sometimes the seal failure will occur. What are the reasons for the failure of the cone crusher?

Cause of damage to the seal

1, the seal is seriously worn

When the gap of the cone crusher becomes smaller, the seal is crushed and deformed and severely worn. Or when replacing some wear parts, since the replacement period of the seal is different from the wear cycle of the friction parts, the newness and the degree of the two are different, so that the sealing pressing force of the rubber sealing ring is increased, and the local deformation is lifted to cause the sealing member. damage.

2, seal aging

The rubber seal is affected by the oil quality, temperature and time factor in use, and the selection of the material for manufacturing the seal ring is improper, and the aging phenomenon is prone to occur, so that the seal ring body loses its elasticity and the sealing state changes, thereby causing the device seal to fail.

Seal deformation

1. Force deformation

When the crushing wall of the cone crusher and the crushing wall break the ore, the strong crushing force causes the body to tilt or vibrate, and the sealing member is easily deformed away from the original motion track, so that the original sealing state is changed, resulting in failure of the device seal.

2, improper installation.

When the conical crusher is installed, repaired, or replaced with a seal, the seal is partially deformed due to improper installation, resulting in failure of the equipment seal.

3, poor lubrication

Friction parts tend to have metal particles and the dust ore mixed people, as well as long-term in a high temperature environment, the lubricating oil degradation, improving the fluidity deteriorates, the resistance the seal caused by local deformation.

The above is the reason for the failure of the cone crusher seal. Users should pay attention to these small details in daily operation and reduce the failure time of the cone crusher seal.


Curtain Wall Profiles

Knilex curtain wall aluminum profile has the characteristics of high strength, light weight, easy installation, beautiful appearance, corrosion resistance and weather resistance, widely used in exposed frame, hidden frame, semi-hidden frame, unitized curtain wall, light curtain wall, stone curtain wall, etc.


Curtain Wall Revit,Curtain Wall Building,Wood Curtain Wall,Curtain Wall Window,curtain wall,curtain walls

Foshan Knilex Aluminum Co., Ltd. , https://www.aluprofilemaker.com

This entry was posted in on