Description of  chain link fence machine
1. Taiwan Delta Servo motor 5.5kw +Planetary Reducer (rate 1:3).
2. Japan Mitsubishi PLC origin + Touchable screen,only one person is needed to operate it.
3. Alarm device + Emergency button+Counter
4. Single mold, double spiral.
5. 12-procedure processed Straightening wheels.
6. The mesh will automatically wound to form rolls when the desired length is produced.
7. Mesh sides can be both twisted, knuckled.Or twist one side knuckle the other side.
8. Schneider Low-Voltage electronics;
9. Customized voltage: 220V, 50HZ
10. Suitable wire to the machine:low carbon steel wire,galvanized steel wire,stainless steel wire,aluminum alloy wire,PVC coated wire
Â
Modal |
DP-LW25-80 |
Mesh width scope |
2-4m |
Max weaving length |
20m |
Mesh opening scope |
25-80mm |
Wire diameter scope |
1.8-4mm |
Motor Power |
6Â KW |
Output capacity |
70m²-- 80m²per hour. |
Electric system |
1.Japan Mitsubishi PLC origin 2.Servo motor 3.Low-voltage electrical system from French Schneider 4.Electric & Machinery from Taiwan Teco Electronic 5.Clutch from Taiwan YA CO.,LTD |
Control system |
PLC automatic controller |
Weight |
3900kg |
Dimension |
Main machine: 6700*1430*1800mm |
Detailed parts of chain link fence machineÂ
Mesh sides can be both twisted or knuckled
 
Machine Loading
Â
,Isuzu Flatbed Tow Truck,Flatbed Light Duty Wrecker Tow Truck
Hubei Chenglongwei Special Purpose Vehicle Co., Ltd. , https://www.clw-automobile.com