Conical Screw Mixer is worldwide acknowledged as the industrial standard conical shape mixer and Conical Screw Mixer is used on a wide variety of applications in the industry such as pharmaceutical, food, battery materials, dyestuff & pigment, chemical industry, fertilizer, rare earth, titanium powder etc. Conical Screw Mixer is widely used to mix powder-powder, power-liquid, especially for fine powder, fiber or chip-shaped materials
Â
Working Principle:
Conical screw mixer is made based on the principle of rotation and revolution, conveying the material along with the axle by means of rotation. Simultaneously, the material is upward and downward cycled by gyratory stirring along wall surface of cone, with the central revolution, conical screw mixer can be performed in the shortest time.
Â
Features:
1, homogeneous mixing & no deadcorner
2, short mixing time 5-15minutes
3, clean discharge & no leftover
4, central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5, main shaft seal: Stuffing seal and air purge seal
6, drive: Siemens motor, cycloid or gear reducer
7, limit/safety switch (optional)
8, heating/cooling jacket optional)
Datasheet:
Â
Â
Â
| Â Â Model Project | All volume (M3) |
Loads coefficient | Electrical machiney power (KW) |
Size (mm)× Max-diameter ×High | Equipment weight (kg) |
| DSH-0.06 | 0.06 | 0.4-0.6 | 1.5 | φ630×1451 | 150 |
| DSH-0.1 | 0.1 | 0.4-0.6 | 1.5 | φ715×1569 | 250 |
| DSH-0.3 | 0.3 | 0.4-0.6 | 2.2 | φ920×1960 | 550 |
| DSH-0.5 | 0.5 | 0.4-0.6 | 3 | φ1140×2320 | 600 |
| DSH-1 | 1 | 0.4-0.6 | 4 | φ1480×2895 | 1200 |
| DSH-1.5 | 1.5 | 0.4-0.6 | 5.5 | φ1633×3210 | 1350 |
| DSH-2 | 2 | 0.4-0.6 | 5.5 | φ1816×3495 | 1500 |
| DSH-3 | 3 | 0.4-0.6 | 7.5 | φ2040×3760 | 2300 |
| DSH-4 | 4 | 0.4-0.6 | 11 | φ2250×4425 | 2520 |
| DSH-6 | 6 | 0.4-0.6 | 15 | φ2548×4940 | 3000 |
| DSH-8 | 8 | 0.4-0.6 | 18.5 | φ2780×5360 | 4500 |
| DSH-10 | 10 | 0.4-0.6 | 22 | φ3018×5815 | 5500 |
| DSH-12 | 12 | 0.4-0.6 | 22 | φ3204×6100 | 5900 |
| DSH-15 | 15 | 0.4-0.6 | 30 | φ3442×6540 | 6600 |
| DSH-20 | 20 | 0.4-0.6 | 37 | φ3805×7420 | 9800 |
| DSH-25 | 25 | 0.4-0.6 | 37 | φ4086×7800 | 10200 |
| DSH-30 | 30 | 0.4-0.6 | 45 | φ4330×8200 | 11500 |
 2.    Changes are available according to customer's special requirement;
 3.   Shuang Long Group might develop new data which is not modified timely on the Web.
Applications:
U&C Channel steel is a long strip of steel with a groove-shaped cross-section. Its specifications are expressed in millimeters of waist height (h) * leg width (b) * waist thickness (d), such as 120*60*5.5, which means that the channel steel with a waist height of 120 mm and a leg width of 60 mm has a waist thickness of 5.5 mm. mm channel steel, or UPE120 channel steel.
Channel steel has a wide range of uses and can be used in construction, machinery manufacturing, automobile manufacturing, shipbuilding and other fields. In the field of construction, channel steel is often used to make steel structure frames, support frames, beams and columns, etc. In the field of machinery manufacturing, channel steel is often used to make machine tool beds, tracks, conveyor belts, etc. In the field of automobile manufacturing, channel steel is often used to make frame, body and so on. In the field of shipbuilding, channel steel is often used to make hull frames, ship equipment, etc.
Mild steel channel is widely used in civil engineering and construction to support floor joists and to weight bear above window and door gaps where the structural load does not require an I beam.
C Channel Steel,Hat Channel Steel,Galvanised Steel Channel
Tianjin Youfa Steel Co., Ltd , https://www.youfametal.com